2018 Mechanical Ch 5

The termination point for a flammable vapor duct shall be min. _ ‘from any property line.

• 3
• 5
• 10
• 30
• 501.3.1, #1

An exhaust opening's bottom shall be located a max in a fuel dispensing area. of _ “ above the floor.

• 6
• 12
• 18
• 24
• 502.1.2

The exhaust rate for xenon projectors shall be a min. of _ cfm per lamp.

• 100
• 200
• 300
• 400
• 502.11.2

Continuous room Vent.at min. rate of _ cfm per -sq. ft. is required for stationary storage battery systems.

• 1
• 2
• 3
• 4
• 502.4.2

The exhaust system for a Type II dry-cleaning system shall provide an exhaust air flow rate of _ cfm per -sq. ft. of floor area.

• 10
• 4
• 1
• 6
• 502.6.1

Type IV and V systems need an activated exhaust to maintain a min. Vel. of _ ‘per minute through the loading door when opened.

• 40
• 50
• 80
• 100
• 502.6.2

Comp. med. gas storage cabinets shall be connected to an exhaust system with a min. avg. Vel. of Vent.at the face of access ports of _ ‘per minute.

• 100
• 150
• 200
• 300
• 502.9.1

When exhaust fans must be spark resistant, all parts of the fan shall be _ .

• plastic
• noncorrosive
• grounded
• nonmetallic
• 503.2

Clothes dryer INSTLNs exhausting more than _ cfm shall be provided with makeup air.

• 100
• 150
• 200
• 300
• 504.6

Domestic clothes dryer exhaust ducts shall be a nominal size of _ “ in diameter.

• 3
• 4
• 5
• 6
• 504.8.1