Into To Connectivity

PC 1 IP : 192.168.1.2/25
PC2 IP : 192.168.2.2/25
If PC1 is connected to PC2 with a point-to-point connection,
will they be able to communicate?

• Yes

• No

• Only if they are in the same VLAN

• It depends on the cable type

What is the network topology that provides the best redundancy?

• Full Mesh

• Star

• Bus

• Ring

Which layers does the Hub & the Bridge operate in respectively?

• Layer 1 & Layer 2

• Both operate in Layer 2

• Layer 2 & Layer 3

• Layer 2 & Layer 1

What happens if PC1 (192.168.1.1/24) in Vlan1 pings PC2 (192.168.1.2/24) in Vlan1?

• PC1 will forward the packet to the default gateway, and the gateway forwards it to PC2

• PC1 won't be able to ping PC2 as they are in the same VLAN

• PC1 will forward the packet directly to PC2 and the ping is successful

• None of the previous

The PDU in layer 4 is called a ___

Draw a ring topology

What happens when a device in VLAN 10 sends a broadcast frame.

• It is sent to all devices in the network

• It is sent to the default gateway

• It is sent to all devices that belong to VLAN 10

• It is sent to all devices except the devices in VLAN 10

To perform Inter-VLAN routing we would need a

• Router

• Switch

• Bridge

• Hub

From the pros of configuring VLANs

• Separating the network on a L3 level

• Achieving a single broadcast domain in the entire network

• Reducing the number of devices in the network

• Enhances the network security

What is a default gateway?

• The device in which traffic destined outside the network is forwarded to

• The device that provides the IP addresses to the end hosts

• A layer 1 device that is used to repeat the received signal

• None of the previous