Core IVUS Screen

You can either free type text or select from the pre-populated drop down list for this box:

• Patient ID

• Gender

• Procedure

• Physician

When entering patient information, you can either free type the text into the boxes or you can select from ________.

After entering all of the patient information for the case, you can click either of these two buttons to begin your IVUS case:

• OK

• Clear Form

• New Case

• Home

Answer explanation

They can hit "Ok" or they can just click the "Home" tab and that will bring them to the live IVUS cross section view.

Both the "New Case" and the "Clear Form" buttons will clear the data you just entered and you'll have to start over.

This is a mild frustration with the Core system since sometimes staff think hitting "New Case" will begin the IVUS portion of the case.

This is not something you have to worry about with IntraSight, the software is much smoother.

After entering all of the patient information, clicking either of these buttons will clear the patient info and you would have to start over:

• New Case

• Clear Form

• OK

• Home

Answer explanation

Both the "New Case" and the "Clear Form" buttons will clear the data you just entered and you'll have to start over.

This is a mild frustration with the Core system since sometimes staff think hitting "New Case" will begin the IVUS portion of the case.

This is not something you have to worry about with IntraSight, the software is much smoother.

They can hit "Ok" or they can just click the "Home" tab and that will bring them to the live IVUS cross section view to start the case.

If you would like to delete duplicate physician names from the drop down list, click:

• Clear Form

• New Case

• Edit

• FFR

What on the IVUS start up screen tells you that the IVUS Pim is being recognized by the Core and is ready to use?

• "Select Mode" on the bottom left corner

• The beating heart in the upper right hand corner

• The fact that you can click the Home tab button (if inactive it would be greyed out)

• The Phased Array with a green circle in the bottom right hand corner

Answer explanation

If the Pim is either unplugged or if the Pim cable or the Pim itself is broken, then the bottom right corner will say "No Pim" with a black circle.

This is an easy first thing to check when troubleshooting an issue with a customer.

What on the IVUS start up screen tells you that there is an ECG signal being received by the Core system?

• "Select Mode" on the bottom left corner

• The beating heart in the upper right hand corner

• The fact that you can click the Home tab button (if inactive it would be greyed out)

• The Phased Array with a green circle in the bottom right hand corner

Answer explanation

The beating heart in the upper right hand corner confirms the system is receiving an ECG signal through the hemo cable. You will need an ECG signal in order to use the VH feature.

(Please note that VH is no longer a feature on IntraSight. If you have customers using this then they will lose it once they upgrade)

Tags

NGSS.HS-PS3-5

Where on the screen will you see the on-screen cues for the IVUS workflow on the Core system?

• Bottom left

• Bottom right

• Upper left

• Upper right

Answer explanation

On the bottom left of the screen, you can see the words "Plug Catheter into Pim".

The bottom left of the Core screen is where you will see on-screen cues to tell the user what step they should logically do next.

You have just plugged in an Eagle Eye Platinum catheter into the Core system.

The image here shows what your screen looks like AFTER you plugged the catheter in to the Pim.

Where do you see something that might hint that the catheter might be bad? (Pick two answers)

• Bottom left

• Bottom right

• Upper left

• Upper right

Answer explanation

On the upper left of the screen you see the words "NO CATHETER". The system is not recognizing that you plugged in the catheter. The catheter may be bad.

On the bottom left of the screen, you can see the words "Plug Catheter into Pim". This means that it does not recognize that you've plugged a catheter in. Again, the catheter may be bad.

The bottom right of the Core screen shows a green circle next to the phased array. That shows that the system DOES recognize that there is a Pim connected, so the Pim is not the issue. It is most likely the catheter.

In the upper right corner you can see the Case Explorer menu (sorry, not the best picture).

How do you access the Case Explorer dropdown?

• You click on Case Explorer.

• You hover the cursor over the Case Explorer and the dropdown will appear.

• Voice command

• Vibes