Cuestionario sobre UAVs

Currently, the number 1 UAV manufacturer in the world is:

• Parrot

• Tesla

• DJI

• XM2

The UAV propellers are installed to rotate in alternate directions to:

• Achieve zero torque.

• Maximize airflow.

• Move the force of gravity closer to the center.

• Allow mobility in all directions.

In drones, the GPS receiver is usually:

• Integrated into the flight controller.

• An external device, usually placed near the battery.

• An internal device, usually combined with the ESC to maximize interference.

• An external device, usually placed on top to improve reception.

When designing a drone, we must adhere to the general rule of allowing a thrust-to-weight ratio of 2:1 to allow:

• Counteract the effect of the wind.

• Allow carrying some load.

• Allow good agility and mobility.

• All of the above options are correct.

What level of UAV autonomy assumes that missions are completely defined and executed by AI agents?

• 1

• 3

• 5

• 10

The protocol typically used to interface with open-source UAV controllers is:

• I2C

• MAVLink

• MQTT

• None of the above

The maximum allowed flight altitude for UAVs is:

• 60 meters

• 100 meters

• 120 meters

• 200 meters

To enable the recreation of 3D versions of monuments or buildings we need:

• Take photos around the target with a high degree of overlap.

• Take photos from 4 different angles at different times of the year.

• Take photos from the same angle at multiple altitudes.

• None of the above.

To define the flight of UAV in photogrammetry applications, we need to define:

• Target area + % overlap + altitude + camera properties

• Target area + # of photos + flight time

• # of photos + flight time + camera lens

• Target area + % overlap + camera properties

The European initiative that aims to integrate UAVs into urban airspace in a safe and controlled manner is known as:

• A-Space

• U-Space

• No-Space

• UAV-Space