9189PH2CHPPT4

What is a main advantage of underfloor heating?

• It requires a higher boiler flow temperature.

• It is only compatible with one type of heat source.

• It requires a lower boiler flow temperature to maintain room temperature.

• It reduces the heat emitter surface area.

How is the heat transferred in an underfloor heating system?

• Through radiation from the ceiling.

• By conduction through a series of pipework systems under the floor.

• By natural convection through open windows.

• Through electrical wires within the walls.

What component of the underfloor heating system distributes the heated water?

• The radiator.

• The boiler.

• The thermostat.

• The manifold.

How does underfloor heating work compared to conventional heat emitters?

• It cools the floor instead of heating it.

• The floor becomes the heat emitter, heated by pipework underneath.

• It uses electrical wires instead of pipework.

• The pipework is laid on top of the floor without insulation.

Where is the pipework for underfloor heating typically laid?

• Inside the walls of the room.

• Under the screed or boards on top of insulated beds.

• On top of the floor covering.

• Directly under the roof for better heat distribution.

What is the purpose of the insulated bed in underfloor heating systems?

• To conduct heat upwards more efficiently

• To prevent heat loss downwards and project heat upwards

• To support the weight of the appliances above

• To regulate the water temperature

How far apart are the pipes usually installed across the floor of the room in an underfloor heating system?

• 50–75mm apart

• 100–150mm apart

• 150–225mm apart

• 200–250mm apart

What is the function of the special mixing valve in an underfloor heating system?

• To prevent the floor from reaching too high a temperature

• To increase the water temperature

• To distribute the heat evenly across the room

• To insulate the bed

Where should the manifolds be located in an underfloor heating system?

• As far away from the center as possible

• Directly under kitchen units and appliances

• As centrally as possible, avoiding underfloor pipe runs under kitchen units

• Outside the room being heated

At what temperature range do most central heating systems containing radiators and convectors operate?

• 40–45°C

• 50–60°C

• 70–80°C

• 30–35°C