FRT_MA_231212

Electrically conductive seat, driver harness, and firewall mounting points as well as the aluminium layer of the TS firewall, and the LVS ground measuring point, must have a resistance below ? Ω.

Electrically conductive seat, driver harness, and firewall mounting points as well as the aluminium layer of the TS firewall, and the LVS ground measuring point, must have a resistance below 300 mΩ, measured with a current of 1 A, to LVS ground and be able to continuously carry at least _ current rating.

• 10 % of the TS accumulator main fuse

• 50% of the LVS

• 20% of the TSAC weakest fuse

• 10% of the TSAC weakest fuse

If _ and _ are on the same PCB, they must be on separate well-defined areas of the board, meeting the spacing requirements.

• HV

• TS

• LVS

• LV

The AMS must be able to _ and _ all measured values.

• read

• scan

• show

• display

The IMD must be a a Bender A-ISOMETER® _ or a Bender ISOMETER® _ or equivalent IMD approved for automotive use.

• iso-F1 IR155-3203

• iso-F1 IR144-1011

• iso145A-3

• iso165C-1

All connections of the charger(s) must be _ and _.

• insulated

• grounded

• covered

• orange

The action of opening the SDC must occur if the implausibility is persistent for more than ? ms.

Argument with, or disobedience to, any official results in the team being eliminated from the competition.

• True

• False

Grinding, drilling, etc. is allowed in the charging area.

• True

• False

Monocoque – a chassis made of _ material.