Postest Cisco Day-01

A network technician is attempting to configure an interface by entering the following command:

Tokyo(config)# ip address 192.168.2.1 255.255.255.0.

The command is rejected by the device. What is the reason for this?

• The command is being entered from the wrong mode of operation.

• The command syntax is wrong.

• The subnet mask information is incorrect.

• The interface is shutdown and must be enabled before the switch will accept the IP address.

You would use ________ cable to connect to the Cisco switch for the first time

• straight Ethernet cable

• Crossover Ethernet cable

• Rollover Cable

• Serial Cable

Which of the following commands will display the Running configuration?

• show running-config

• show startup-config

• show flash:

• show version

Which is Subnet Mask IP address if the prefix /27 is :

• 255.255.255.224

• 255.255.255.0

• 255.255.255.252

• 255.255.255.192

It is a process that occurs on almost every computer when it boots up. It is used to test the router hardware. 

• POST

• Bootstrap

• IOS

• Startup configuration

To configure the Ethernet interface with the IP address 192.180.10.2/24, you type the command : 

• Router(config-if)#ip address 192.180.10.2

• Router(config)#ip address 192.180.10.2 255.255.255.0

• Router(config-if)#ip address 192.180.10.2 255.255.255.0

• Router(config-if)#ip address 192.180.10.2 255.255.255.255

Which command takes you from user mode forward to privileged  mode ?

• exit

• enable

• disable

• Ctrl + Z

Which CLI Command Mode prompt indicates you are in Privileged EXEC mode ?

• Router>

• Router#

• Router (config-if)#

• Router (config)#

The computers in Peter's office building are linked using wired so that staff can share files and printers. This type of network is known as .

• WAN

• MAN

• LAN

• WLAN

Which two commands identify the serial number of a Cisco router? (Choose two.)

• show running-config

• show inventory

• show environtment

• show version

• show ip interface brief