hand safety quiz

What is wrong with this photo?

I. Not wearing cut resistance glove

II. Not using safety glasses

III. Using unapproved knife

IV. Not using ear plug

• I

• I and II

• I, II and III

• All above

What is wrong with this photo?

• A. Not wearing cut resistance glove

• B. his left hand is in dangerous position (line of fire)

• C. table surface not appropriate

• All A, B and C

The following is examples of hand tools used in incorrect ways / unsafe conditions EXCEPT:

• Using the Metric Allen Key to tighten Inch type screws

• Using inch type Allen Key to loosen Inch type screws

• Using screwdrivers to open carton boxes

• Using a spanner or wrench as a hammer

Which of these knives are allowed in Sonoco premises?

• A, B and C

• A, B and D

• B, C and D

• All above

When lifting a heavy load, which is not correct?

• 
• 
• 
• 

What is NOT the way to prevent hand injury?

• Visually check hand tools before use

• Having the correct tools before starting a task.

• Cleaning hand tools before and after use.

• Continue using worn out hand tools

Let say that your machine's Safety Interlock is already broken. As a good operator who concerns about your own safety and safety of others, what should you do?

• Just do nothing. bypass safety and pretend that the interlock is still working.

• Fight with the mechanics to change the interlock no matter what. Stop the line until this is solve

• Find Uncle David for help, so this issue can be solved in civilized manner. Set up alternative safety measures if interlock is unavailable

• Demand KFC from Mr. Chern every week.

Does Master Izzuddin have the rights to force you to work in an unsafe work condition / environment?

• Yes, we need to get more output to meet customer's demand

• No. Safety is our top priority and our right to STOP if the condition is not safe.

Let say that we have another paper break and cable dislodge from pulley happen at winder Line 2. As a machine operator / line leader, what should you do?

• Since I have 17 years of experience, I will just do this myself with the help of my operators, even though this is not my routine task

• Do nothing, hope for a miracle that the cable will align itself back into the pulley slot

• Ask help from line 1 leader as maintenance may be busy repairing other lines

• Inform maintenance team and they must make sure that they are trained to do this task safety.

Shell Press machine always have metal strip drop jam for almost every hour. What should you do to make your life easier?

• bypass interlock door to clear the jam faster-faster

• fine tune machine setting until get good result, always make sure that the interlock is not bypassed

• Blame Yasir for everything

• Just go back home and MC tomorrow due to body pain