If an SVM is renamed and it is participating in an intercluster SVM peer relationship, what is the result?

SVM peers are removed and they need to be re-created.

SnapMirror relationships appear as broken and a resync is required.

Remote clusters are updated with the new peer SVM name.

Snapshot copies are renamed with the new SVM unique identifier.

What is the purpose of Epsilon?

to be used as a tie-breaker for a cluster quorum

to be used as a load-balancer for a 2-node cluster

to evaluate the differences in node configurations

You are running a FAS8200 system with ONTAP 9.5 with a Flash Pool aggregate. You have an SVM root volume and two volumes (Vol1 and Vol2). In this scenario, which two catching technologies would be applied to which volumes? (Choose two.)

FlashPool can be applied to all volumes including the SVM root volume

FlashCache can be applied to all volumes including the SVM root volume

FlashPool can be applied to all volumes except teh SVM root volume

FlashCache can be applied to all volumes except the SVM root volume

Which two configuration limits should you verify when you add additional storage to an AFF A300 switchless configuration? (Choose two.)

the supported number of SSD disks for the A300 system

the supported number of shelves

the supported number of HDDs for the A300 system

teh supported number of FC initiator ports for the A300 system

An administrator is configuring a third-party software for NDMP. The application is targeting the IP of the data LIF of the SVM called “SVM1. “NDMP is configured as the SVM scope. The NDMP service is not enabled for the admin SVM. SVM1 has a user called “Tom” with the backup role. Tom can connect by using SSH to the controller with the credentials that he used to configure the third-party software. The authentication of the third-party software is falling. In this scenario, what is the reason for the authentication failure?

the NDMP password has not been generated for Tom.

the user Tom does not belong to the admin SVM.

the NDMP service is not enabled for the admin SVM.

the application is not targetting the IP of the cluster node management LIF.

Which statement is true about creating volumes that contain LUNs?

You cannot create LUNs on an aggregate.

You cannot create LUNs on an SVM root volume.

You cannot create files on a volume that contains LUNs.

You cannot create qtrees on a volume that contains LUNs.

On your customer’s AFF A700, there are multiple volumes within the aggregate aggr1. Within aggr1, volumes vol1, vol2, and vol3 store similar data, and volumes vol4 and vol5 store unique data. In this scenario, which feature would improve storage efficiency with the data stored in volumes vol1, vol2, and vol3?

inline aggregate-level deduplication

You are troubleshooting a Linux host named host1 that sees a connection refused message when you execute the ssh admin@192.168.1.240 command. Referring to the exhibit, what is the reason for this message?

The firewall policy is blocking the host.

DNS is not resolving the host name.

When you create a FlexVol volume, which security style is applied by default?

the security style of the SVM root volume

the security style of the root volume of the cluster

An administrator created an SVM for a VMware vSphere 6.5 cluster. For the SVM, the NFS protocol was enabled. Data LIFs were configured with jumbo frames. The nfs01 volume was created and mounted as junction path / nfs01. A VMware export policy that allowed all the hosts of the cluster was applied to the SVM. However, the hosts are unable to mount the volume. In this scenario, what caused the problem?

The maximum transmission unit (MTU) was not set properly on the ESXi hosts.

The volume is not thin provisioned.

The default export policy needs to allow reads from the ESXi hosts.

NFS v3 is not compatible with ESXi hosts.

Which three privileges are available to the vsadmin role? (Choose three.)

managing volumes, except volume moves.

managing aggregates, except aggregate relocate.

Which mediator type is required for an ONTAP Select 2-node HA solution?

mediator storage virtual machine.

You want to use FabricPool technology to tier SnapVault destination volumes to the capacity tier. In this scenario, which action would you perform to accomplish this task?

Create the destination volume on the FabricPool-enabled aggregate and assign the backup tiering policy to the destination volume.

Create both the source and destination volumes on the FabricPool-enabled aggregate and assign the backup tiering policy to the source volume.

Create both the source and destination volumes on a standard aggregate and assign the backup tiering policy to the destination volume.

Create the source volume on the FabricPool-enabled aggregate and assign the backup tiering policy to the source volume.

An administrator needs to configure ports for peering. Referring to the exhibit, which ports should be used?

CDOT93-01:e0f and CDOT93-02:e0f

CDOT93-01:e0a and CDOT93-02:e0a

CDOT93-01:e0d and CDOT93-02:e0d

CDOT93-01:e0e and CDOT93-02:e0e

When performing a manual MetroCluster switchover, which two statements are true? (Choose two.)

All SVMs in the disaster site are switched over.

All DR groups in the disaster site are switched over.

Only the user specified SVMs are switched over.

Only the user specified DR groups are switched over.

You create SAN volumes with System Manager on a FAS solution. In this scenario, what are three default settings for these volumes?

Volume space guarantee is set to None.

Volume snapshot reserve is set to 0.

Volumes have inline deduplication enabled.

Volume space guarantee is set to Volume.

Volumes have snapshot copies disabled.

When you use the default SnapMirror policy during transfer of a data protection SnapMirror relationship, what is transferred?

only the existing snapshot copies.

the snapshot copy that is manually created and any existing snapshot copies.

the snapshot copy that is created by the transfer process and any existing copies.

Which command enables ONTAP storage failover?

storage failover modify -enabled true -node nodename

cluster ha modify -configured false

storage failover modify -enabled false -node nodename

storage failover modify -mode ha -node nodename

A network administrator has configured an upstream switch for LACP. In this scenario, which action should be performed when the NetApp interface group is created?

Set the distribution function to "port".

Set the type to "dynamic multimode"

Set the type to "static multimode"

Set the distribution function to "IP".

An administrator forgot to update the cabling sheet for a core Cisco switch and cannot recall which ports were used by the NetApp FAS system. Which command should the administrator run to obtain this information?

network port broadcast-domain show

You are creating a CIFS-based SVM, but the SVM cannot join the domain. In this scenario, which two actions would be helpful in troubleshooting the problem? (Choose two.)

Verify that each node has a data LIF.

Verify that the data LIF can access the Active Directory domain controller.

Verify that the cluster admin account is used to join the Active Directory.

Verify that the clocks are synchronized between the SVM and the domain controller.

An administrator is configuring an aggregate to use FabricPool to take advantage of auto tiering. In this scenario, what are three requirements to accomplish this task? (Choose three.)

Volume with space-guarantee none

Volume with space-guarantee volume

Which command would you use to enable the ONTAP HA feature?

storage failover modify -enabled true -node *

network options switchless-cluster modify true

You execute the volume unmount -vserver vsl -volume vol1 command. In this scenario, which statement is true?

The existing volume export policies on the volume or on directories and junction points within the umounted volume are not retained.

All data within the junction point is inaccessible to NAS clients.

The snapshot policy in the volume needs to be recreated once the volume is remounted.

Data within the vol1 volume is lost.

NCDA

Authored by Anonymous Anonymous

Computers

Professional Development

Used 6+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

123 questions

Show all answers

MULTIPLE CHOICE QUESTION

1 min • 1 pt

According to NetApp best practices, when you configure FC, how many data LIFs should you create per node?

MULTIPLE SELECT QUESTION

1 min • 1 pt

What are two client specifications for an export rule? (Choose two.)

0.0.0.0/16

192.168.100.0/16

0.0.0.0/0

192.168.100.0/0

MULTIPLE SELECT QUESTION

1 min • 1 pt

Which three name services does ONTAP support? (Choose three.)

NIS

SNMP

HTTP

local files

LDAP

MULTIPLE SELECT QUESTION

1 min • 1 pt

In which two scenarios would you use a storage pool? (Choose two.)

when you need to share an SSD caching layer within an HA pair

when providing an SSD cachin layer evenly across multiple aggregates

when migrating the aggregate over to the partner node

when you have an SVM that is running on block protocol

MULTIPLE CHOICE QUESTION

1 min • 1 pt

You must create separate SVMs that are based on teams. You also need to create separate SVMs that are based on the block-level and file-level protocols. Your DevOps team requests NFS and CIFS protocols, your AI team requests NFS and NVMe protocols, and your marketing team requests SBM and iSCSI protocols.
In this scenario, what is the minimum number of SVMs that you must create to satisfy these requirements?

MULTIPLE CHOICE QUESTION

1 min • 1 pt

A storage administrator currently has an 8-node FAS8200 cluster with CIFS, NFS, and iSCSI licenses installed. In this scenario, how many additional nodes are supported?

MULTIPLE SELECT QUESTION

1 min • 1 pt

What are two advantages of creating small RAID groups inside an aggregate? (Choose two.)

maximized storage space

additional available spare drives

decreased risk of muiltiple disk failure

shorter reconstruction time

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

123 questions

Professional Data Engineer

Quiz

•

Professional Development

Popular Resources on Wayground

8 questions

Spartan Way - Classroom Responsible

Quiz

•

9th - 12th Grade

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

14 questions

Boundaries & Healthy Relationships

Lesson

•

6th - 8th Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

3 questions

Integrity and Your Health

Lesson

•

6th - 8th Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

9 questions

FOREST Perception

Lesson

•

20 questions

Main Idea and Details

Quiz

•

5th Grade

Discover more resources for Computers

15 questions

LOTE_SPN2 5WEEK3 Day 2 Itinerary

Quiz

•

Professional Development

6 questions

Copy of G5_U6_L5_22-23

Lesson

•

KG - Professional Dev...

10 questions

March Quiz

Quiz

•

Professional Development

5 questions

Copy of G5_U6_L8_22-23

Lesson

•

KG - Professional Dev...

10 questions

suffixes FUL OR LESS

Quiz

•

Professional Development

NCDA

According to NetApp best practices, when you configure FC, how many data LIFs should you create per node?

What are two client specifications for an export rule? (Choose two.)

Which three name services does ONTAP support? (Choose three.)

In which two scenarios would you use a storage pool? (Choose two.)

A storage administrator currently has an 8-node FAS8200 cluster with CIFS, NFS, and iSCSI licenses installed. In this scenario, how many additional nodes are supported?

What are two advantages of creating small RAID groups inside an aggregate? (Choose two.)

If an SVM is renamed and it is participating in an intercluster SVM peer relationship, what is the result?

Which failover policy is set by default on an iSCSI LIF?

What is the purpose of Epsilon?

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Computers