You need to verify that an interface is in the proper VLAN. Which command will display the status of the interface, the VLAN configured, and the operational mode?

Switch#show interfaces switchport

You configured VLAN on an interface, but it is not working. After looking at the VLAN database, you find it has been disabled. Which command will enable the VLAN?

Switch(config)#vlan 3 Switch(config-vlan)#no shutdown

Switch#no shutdown vlan 3

You need to remove VLANs 2 through 4 from the allowed list on a trunk interface. Which command will remove only these VLANs without interruption to the network?

Switch(config-if)#switchport trunk allowed vlan remove 2-4

Switch(config-if)#switchport trunk remove vlan 2-4

Switch(config-if)#switchport remove vlan 2-4

Switch(config-if)#switchport trunk allowed remove vlan 2-4

You need to add VLAN 4 to the allowed list on a trunk interface. Currently VLANs 5 through 8 are allowed. Which command will add only this VLAN without interruption to the network?

Switch(config-if)#switchport trunk allowed vlan add 4

Switch(config-if)#add allowed vlan 4

Switch(config-if)#switchport trunk add vlan 4

Switch(config-if)#switchport trunk allowed add vlan 4

How does IEEE 802.1Q tag frames?

802.1Q inserts a 32-bit field between the source MAC address and the type field.

802.1Q adds a 32-bit header to the frame with the VLAN tagging information.

802.1Q adds a 32-bit header to the packet with the VLAN tagging information.

802.1Q inserts a 32-bit field between the destination MAC address and the type field.

Which statement is correct about native VLANs?

Any traffic not tagged will be placed on the native VLAN.

Any traffic tagged will be placed on the native VLAN.

Any traffic that is not allowed over the trunk will be placed on the native VLAN.

Any traffic that is tagged with ISL on an 802.1Q trunk will be placed on the native VLAN.

Switch A has default configuration on its interface. You need to configure Switch A for VLAN 5. Which command will configure the interface to become a member of VLAN 5?

SwitchA(config-if)#switchport access SwitchA(config-if)#switchport access vlan 5

SwitchA(config-if)#switchport mode access SwitchA(config-if)#switchport access vlan 5

SwitchA(config-if)#switchport trunk SwitchA(config-if)#switchport native vlan 5

SwitchA(config-if)#switchport mode trunk SwitchA(config-if)#switchport native vlan 5

You need to configure a trunk interface to support the protocol of 802.1Q. Which command will achieve this?

Switch(config-if)#switchport trunk encapsulation 802.1q

Switch(config-if)#switchport mode trunk 802.1q

Switch(config-if)#switchport 802.1q

Switch(config-if)#switchport encapsulation trunk 802.1q

When a frame is not tagged with 802.1Q VLAN identifying information, what happens when it traverses a trunk port?

The frame is forwarded to the native VLAN.

The frame is dropped to the bit bucket.

The frame is forwarded to the default VLAN.

The frame is sent to the first VLAN ID configured on the trunk.

What is the difference between a default VLAN and a native VLAN?

A default VLAN is configured on all access ports of the switch from the factory.

A native VLAN is configured on all access ports of the switch from the factory.

A default VLAN is configured on all trunks for tagged frames.

A native VLAN is configured on all trunks for tagged frames.

Day - 6 : VLAN and Trunks

Authored by Kaushik Panta

Computers

University

Used 16+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

19 questions

Show all answers

MULTIPLE CHOICE QUESTION

20 sec • 1 pt

Which of the following is a true statement about static access ports?

An access port can carry VLANs via tagging.

A client computer can request the VLAN to be placed in.

A client computer cannot see any VLAN tagging information.

A client computer can see the VLAN tagging information.

MULTIPLE CHOICE QUESTION

20 sec • 1 pt

What is the extended VLAN range?

VLAN 1002 to 4096

VLAN 1006 to 4094

VLAN 1006 to 4096

VLAN 1006 to 4092

MULTIPLE CHOICE QUESTION

20 sec • 1 pt

Which command(s) will delete a VLAN?

Switch(config)#vlan database Switch(config-vlan)#no vlan 9

Switch(config)#vlan database Switch(config-vlan)#delete vlan 9

Switch(config)#no vlan 9

Switch(config)#vlan 9 delete

MULTIPLE CHOICE QUESTION

20 sec • 1 pt

You are trying to reprovision a switch in a different part of your network. However, you still see the old VLANs configured from the old network. How can you rectify the problem?

Upgrade the IOS.

Type erase startup-config, confirm it, and reload.

Type clear vlan, confirm it, and reload.

Delete the vlan.dat, confirm it, and reload.

MULTIPLE CHOICE QUESTION

20 sec • 1 pt

You have changed the name of VLAN 3, and you now want to check your change. Which command will you enter to verify the name change?

Switch#show vlans

Switch#show interface vlan 3

Switch#show run

Switch#show vlan id 3

MULTIPLE CHOICE QUESTION

20 sec • 1 pt

You have created a VLAN for the Research department. Now you need to configure an interface on the switch for the newly created VLAN. Which command will configure the interface for the respective VLAN?

Switch(config-if)#switchport vlan research

Switch(config-if)#switchport access vlan research

Switch(config-if)#switchport access vlan 9

Switch(config-if)#switchport vlan 9

MULTIPLE CHOICE QUESTION

20 sec • 1 pt

What is the command to verify a VLAN and the port(s) it is associated with?

Switch#show vlans

Switch#show vlan

Switch#show access vlan

Switch#show vlan database

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

16 questions

PENILAIAN TENGAH SEMESTER MANDIRI BERSAMA

Quiz

•

University

20 questions

MTA: 98-367 Security Part 1

Quiz

•

KG - Professional Dev...

20 questions

Recap C++

Quiz

•

University

15 questions

Got Git?

Quiz

•

University

20 questions

L73_118 Prep for Test

Quiz

•

12th Grade - University

20 questions

VideoGames

Quiz

•

KG - University

14 questions

JavaScript

Quiz

•

University

15 questions

Git

Quiz

•

University

Popular Resources on Wayground

8 questions

Spartan Way - Classroom Responsible

Quiz

•

9th - 12th Grade

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

14 questions

Boundaries & Healthy Relationships

Lesson

•

6th - 8th Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

3 questions

Integrity and Your Health

Lesson

•

6th - 8th Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

9 questions

FOREST Perception

Lesson

•

20 questions

Main Idea and Details

Quiz

•

5th Grade

Discover more resources for Computers

20 questions

Disney Trivia

Quiz

•

University

7 questions

Fragments, Run-ons, and Complete Sentences

Interactive video

•

4th Grade - University

7 questions

Renewable and Nonrenewable Resources

Interactive video

•

4th Grade - University

10 questions

DNA Structure and Replication: Crash Course Biology

Interactive video

•

11th Grade - University

7 questions

Force and Motion

Interactive video

•

4th Grade - University

20 questions

Implicit vs. Explicit

Quiz

•

6th Grade - University

14 questions

Ch.3_TEACHER-led

Quiz

•

University

7 questions

Comparing Fractions

Interactive video

•

1st Grade - University

Day - 6 : VLAN and Trunks

Which of the following is a true statement about static access ports?

What is the extended VLAN range?

Which command(s) will delete a VLAN?

You are trying to reprovision a switch in a different part of your network. However, you still see the old VLANs configured from the old network. How can you rectify the problem?

You have changed the name of VLAN 3, and you now want to check your change. Which command will you enter to verify the name change?

You have created a VLAN for the Research department. Now you need to configure an interface on the switch for the newly created VLAN. Which command will configure the interface for the respective VLAN?

What is the command to verify a VLAN and the port(s) it is associated with?

You need to verify that an interface is in the proper VLAN. Which command will display the status of the interface, the VLAN configured, and the operational mode?

You configured VLAN on an interface, but it is not working. After looking at the VLAN database, you find it has been disabled. Which command will enable the VLAN?

You need to view all of the trunks on a switch and verify that they have the proper trunking protocols configured. Which command will display the information?

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Computers