Steering Ch. 46

What is a component of an integral power steering system?

• Hydroduction spooling reducer
• control arm
• pump and reservoir 
• Wastgate

What are the basic benefits of a four wheel steering system?

• Improved stability 
• Reduced turning radius
• Improved handling 
• All of the above

Rack and pinion steering ________.

• is lighter in weight and has fewer components than parallelogram steering
• does not provide as much feel for the road as parallelogram steering
• does not use tie-rods in the same fashion as parallelogram steering
•   is only used when the turbo makes too much horse pressures.

The main job of the idler arm is to __________.

• Support the left side of the center link
• support the right side of the center link
• brace the steering box and frame
• binge watch walker texas ranger

In a rack and pinion steering system, what protects the rack from contamination?

• the inner tie-rod socket
• spaghetti
• spider monkeys 
• the bellows boots

Wandering or poor straight-ahead tracking may be caused by all of the following except 

• worn or loose rack mount bushings
• Minecraft Kahoot
• off center steering gear
• loose or worn tie rod ends

What is the primary purpose of power-steering hoses?

• Defeat communism 
• relieve pressure
• to transmit power through fluid under pressure
• non of the above

A rack and pinion steering gear _____.

• has tie-rods that connect the rack directly to the steering arms
• is a gear in which the rack needs an idler arm to change the direction of the steering arms 
• has inner tie-rod ends that are pressed onto the rack
• has more friction points compared to a parallelogram steering linkage

Gearbox ratio is defined by the number of input turns it takes to make one turn of the output.

• True 
• False 

Power steering sytems use hoses and lines to transmit fluid from the pump to the steering gear.

• True
• False