delete

What type of fitting is shown in Figure 2?

• End feed tee.

• Press-fit tee.

• Compression tee.

• Push-fit tee.

What are the three jointing methods used for connecting domestic soil and waste systems?

• Compression, solvent weld, and push fit.

• Clamped, solvent weld, and push fit.

• Compression, solvent weld, and press fit.

• Brazed, solvent weld, and press fit.

What is the equipment in Figure 3 used for?

• Bending copper pipe.

• Bending LCS pipe.

• Bending MDPE pipe.

• Bending Tracpipe.

What is the purpose of the fixing device shown in Figure 4?

• Fixing components onto plasterboard stud partition walls.

• Used on masonry for heavy load-bearing equipment.

• Fixing control panels and equipment in plant rooms.

• Used on solid floors for securing plant equipment.

What is the correct use for brass school board clips?

• They should only be used in moisture-free buildings to support LCS pipework.

• They are designed for use in commercial properties to support copper pipework.

• They can only be used in domestic properties to support copper pipework.

• They are designed for use in industrial premises to support LCS pipework.

What is the SI unit for mass?

• Ounce

• Pound

• Kilogram

• Stone

What is the SI derived unit for velocity?

• m/s²

• m/s

• km/h

• kg/m³

Which example shows the correct method for calculating volume in metric?

• Length x width x height = M³

• Length x width x height = Ft²

• Length x width x height = M²

• Length x width x height = Ft³

What weight would be required to balance the lever shown in Figure 5?

• 6.25 kg

• 12.5 kg

• 18 kg

• 25 kg

Which factors affect the torque produced by a force acting on an object?

• The applied force and the distance from the pivot point.

• The direction of the force and the material of the object.

• The energy needed to move the object and the position of the pivot point.

• The weight of the object and its position at the starting point.