Canoe Building and Safety Quiz

Which of the following tools is most essential for shaping the strips in a strip plank canoe build?

• Soldering iron

• Block plane

• Paint roller

• Spirit level

When working with epoxy resin during canoe construction, which safety equipment is most important to wear?

• Woollen gloves

• Dust mask

• Nitrile gloves

• Ear defenders

What is the primary purpose of using clamps in the strip plank canoe building process?

• To measure the length of strips

• To hold strips in place while glue sets

• To sand the surface

• To apply varnish evenly

Which of the following is a recommended safety practice when using a power saw to cut canoe strips?

• Wear open-toed shoes

• Keep hands close to the blade for control

• Use safety goggles and keep hands clear of the blade

• Work in a poorly lit area

What is the typical thickness of cedar strips used in strip plank canoe construction?

• 1 inch (25 mm)

• 1/4 inch (6 mm)

• 2 inches (50 mm)

• 3/4 inch (19 mm)

Which of the following is NOT a safety consideration when paddling a one man canoe on open water?

• Wearing a buoyancy aid

• Checking weather conditions

• Bringing a mobile phone in a waterproof case

• Wearing heavy boots

What is the main function of a spokeshave in the canoe building process?

• Mixing epoxy resin

• Shaping and smoothing curved surfaces

• Fastening strips together

• Measuring strip width

Which of the following should be done to ensure a safe working environment when sanding the canoe hull?

• Work in a closed, unventilated space

• Wear a dust mask and ensure good ventilation

• Use bare hands to feel for smoothness

• Sand only at night

What is the recommended minimum thickness for a marine plywood form used as a mould in strip plank canoe building?

• 3 mm

• 6 mm

• 12 mm

• 25 mm

Which of the following is the best way to check for leaks in a newly built strip plank canoe before its first use?

• Fill the canoe with water and look for drips

• Tap the hull and listen for hollow sounds

• Weigh the canoe and compare to plans

• Paint the hull and see if it peels