Latihan Soal Sumatif-Teknik Kendaraan Ringan

What does the word "torque" refer to in an automotive manual?

• Speed of a vehicle

• Power of fuel injection

• Rotational force applied to an object

• Air pressure in tires

• Noise level in the engine

What is the purpose of this instruction?

• To test the gasket

• To prevent engine overheating

• To ensure even pressure and avoid warping

• To reduce oil leakage

• To increase engine speed

Convert this to kilopascals (kPa). (1 psi ≈ 6.89 kPa)

• 200.0 kPa

• 215.4 kPa

• 180.5 kPa

• 250.8 kPa

• 189.4 kPa

Which tool is commonly used to measure valve clearance?

• Torque wrench

• Micrometer

• Feeler gauge

• Vernier caliper

• Multimeter

What does it stand for in a wiring diagram?

• Gear Neutral Drive

• General Node Device

• Ground connection

• Gasoline Neutral Distributor

• Gauge Network Display

What does "Ah" represent?

• Ampere height

• Actual hours

• Alternator help

• Ampere-hour

• Average heat

If a spark plug gap is set at 0.7 mm, but the manual says 0.9 mm ±0.1, is it within range?

• Yes, because it is bigger

• No, it is too small

• Yes, it's within tolerance

• Yes, it's 0.2 mm off

• No, it is too wide

Which part is responsible for mixing air and fuel in older gasoline engines?

• Radiator

• Carburetor

• Crankshaft

• Distributor

• Throttle body

Is this acceptable if the manual states the voltage must stay above 10V?

• Yes, it's perfectly fine

• Yes, if the engine is cold

• No, the battery may be weak

• Yes, if alternator is working

• No, the battery is fully charged

Which of the following oil codes indicates a multigrade engine oil?

• 20

• 10W-40

• SAE 10

• DOT 3

• ISO 46