Latihan Soal Pilihan Ganda Teknik Komputer

What does the term "bandwidth" mean in a networking manual?

• A tool for tightening cables

• The physical length of a cable

• The range of frequencies a signal can use

• The maximum data transfer rate of a network

• The width of a server room

What is the default gateway in this context?

• The IP address of the main switch

• The port number of the modem

• The DNS server name

• The IP address used to configure the router

• The MAC address of a PC

How much power (in watts) does the device consume?

• 13.5 W

• 1.5 W

• 12 W

• 24 W

• 15 W

Which component is responsible for temporarily storing data being used by the CPU?

• SSD

• RAM

• NIC

• BIOS

• GPU

According to a network cable diagram, which wire pair is used for data transmission in T568A standard?

• Pair 1 and Pair 2

• Pair 3 and Pair 4

• Pair 2 and Pair 3

• Pair 4 and Pair 5

• Pair 1 and Pair 3

If a hard disk has 2 TB of space, how many GB is this? (1 TB = 1024 GB)

• 1000 GB

• 2048 GB

• 2024 GB

• 1024 GB

• 2200 GB

What will happen if the instruction is ignored?

• The connector will become waterproof

• The crimping tool will break

• The wires won't connect properly

• The speed will increase

• The IP address will be reset

What is the broadcast address of the network 192.168.10.0/24?

• 192.168.10.0

• 192.168.10.1

• 192.168.10.255

• 192.168.11.0

• 255.255.255.0

What does this mean?

• All ports support only 100 Mbps

• The switch has 10 ports

• Each port can auto-adjust speed up to 1 Gbps

• The switch has a 10 GB hard drive

• The switch uses fiber optic cables

If a cable run is 120 meters, what might happen?

• Data will travel faster

• Signal strength may weaken

• Speed will double

• The cable will overheat

• The MAC address will change