Tractor Storage Best Practices Quiz

What is the most important step before storing a tractor for a long period?

• Cleaning the exterior

• Draining the fuel tank completely

• Disconnecting the battery

• To enhance the paint quality

Why should you change the engine oil before storing a tractor?

• To improve fuel efficiency

• To prevent acidic oil from damaging engine components

• To reduce tire pressure

• To enhance the paint quality

What is the recommended tire pressure for tractor storage?

• Slightly higher than normal to prevent flat spots

• Completely deflated to avoid cracks

• The same as operational pressure

• Doesn’t matter since tires are durable

How often should you start a stored tractor to keep the battery charged?

• Every 6 months

• Once a week

• Once a month

• Never, just disconnect it

What should you do to prevent rust in the fuel system during storage?

• Fill the tank completely to avoid condensation

• Leave the tank empty to prevent residue buildup

• Add a fuel stabilizer and run the engine

• Both A and C

Which part of the tractor should be lubricated before storage?

• Only the engine

• All moving parts (e.g., linkages, joints, PTO shafts)

• Only the tires

• Only the battery terminals

Why should you store the tractor in a dry, covered area?

• To prevent rust and UV damage

• To keep animals from nesting inside

• To reduce battery drain

• All of the above

What is the best way to protect the tractor’s hydraulic system during long-term storage?

• Leave the hydraulic arms fully extended to relieve pressure

• Store with the hydraulic arms lowered to prevent seal damage

• Drain all hydraulic fluid completely

• Disconnect all hydraulic hoses

How can you prevent rodents from damaging stored tractors?

• Place mothballs or rodent repellents around the tractor

• Leave the hood open for ventilation

• Store the tractor outside to allow natural predators to control rodents

• Spray the tires with diesel fuel

Why is it important to clean the tractor thoroughly before storage?

• To improve resale value

• To remove dirt, grease, and debris that can cause corrosion

• To make it easier to inspect for leaks or damage

• All of the above