DDT 19

Who is authorised to remove a Safety Banner once it has been placed? 

• The signaller of that location

• Only the person who placed the banner

• The cleaners of the train

• All of the above

• The driver of the train

If an Overhead defect affects other lines, what kind of radio call must be made? 

• TEC

• Local

• REC

• Cab to Cab

If the Overhead has become disarranged, should an Emergency Track Circuit Jumper Cable be used? 

• Yes

• No

At Tram Way Crossings in times of failure, what may the Driver be required to do?

• Proceed through the Tram Way Crossing as per signal aspects

• Supply 1500v DC Power to the Tram Way 600v DC System by remaining stationary on the Tram Way Crossing

• Declare the Train Disabled

• Coast under the Tram Way Crossing in order to not overload the Tram Way Overhead System

Which controls are located under the lid of the Electro-Hydraulic Point Machine (EHPM)? (Select three (3) responses) 

• Red Directional Control Lever

• Power/Manual Switch

• Selector Lever

• Pump handle socket

• Hand Throw Lever

What is the authority to setback in the Metrol Controlled Area (excluding the MURL)? 

• Train Authority issued by the Train Controller

• Verbal Permission from the Train Controller

• Verbal Authority from the Area Controller and the move supervised by the Senior Network Controller

• Signaller’s Caution Order issued by the Area Controller

How can Train Authorities be issued to a driver? (Select two (2) responses) 

• Handed

• Transmitted

• Dictated

• On a CAN notice

A Driver is required to carry -- train Authorities

A Train Authority is not required to return to the rear if you are: (Select two (2) response) 

• Within Automatic Block Signalling (ABS)

• Within Automatic and Track Control (ATC)

• Within Station Limits

• Within the Metrol Controlled Area (Excluding the MURL)

What is the maximum speed permitted over points when operating in the wrong direction (trailing points become facing points)? 

• Track Speed

• Reduced Speed

• 25km/h

• 15km/h