Carpentry Technology: Exterior Finishes Study Guide 2

Inside and outside corners are installed 1/4" below the bottom edge of the ______ strip and tight to the soffit.

• corner

• edge

• base

• top

Chalk a vertical ______ line to the inside dimension of your outside corner on both sides of an outside corner.

• line

• circle

• square

• triangle

Nail the upper most slot at the ______ of first nailing slot. Continue nailing in the center of the slot every 12" - 16" on both sides ensuring the outside corner is straight & true.

• top

• bottom

• side

• middle

Measure the ______ of your starter strip. Chalk a ______ along the entire length of all sides of the house or structure, using a ______ so that your starter strip covers over the joint between the ______ and your foundation by 1/2".

• length, line, level, joint

• width, curve, ruler, wall

• height, mark, tape, roof

• depth, path, scale, floor

On the ______ piece of siding under a sill or at the top of a wall use ______ to provide a tab for the under sill to catch.

• The question has a diagram associated with it. The diagram has been stored separately.

• nail

• screw

• adhesive