
Brake Caliper Ch 105
Authored by Joseph Henderson
Other
10th Grade
Used 2+ times

AI Actions
Add similar questions
Adjust reading levels
Convert to real-world scenario
Translate activity
More...
Content View
Student View
28 questions
Show all answers
1.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
What part causes the disc brake caliper piston to retract when the brakes are released?
The square cut O-ring
The rotating rotor (disc) that pushes the piston back
Return (retracting) spring
The caliper bushings
2.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Slots are often used in brake pads because they _______.
improve braking performance
increase brake life
reduce brake noise
reduce brake fade
3.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Which of the following is NOT a component of a disc brake system?
Splash shield
Caliper
Brake pads
Backing plate
4.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Technician A says that riveted disc brake pads are often quieter than bonded disc brake pads. Technician B says that integrally molded disc brake pads are molded into holes in the steel backing of the pads. Which technician is correct?
Technician A only
Technician B only
Both technicians
Neither technician
5.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Two technicians are discussing the reason that the brake fluid level in the master cylinder drops. Technician A says that it may be normal due to the wear of the disc brake pads. Technician B says that this is part of the wear compensation feature of disc brakes. Which technician is correct?
Technician A only
Technician B only
Both technicians
Neither technician
6.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Two technicians are discussing a floating-type disc brake caliper. Technician A says that if the caliper slides are corroded, one pad may wear more than the other pad on the same wheel brake. Technician B says that if a caliper slide is corroded, reduced braking may occur. Which technician is correct?
Technician A only
Technician B only
Both technicians
Neither technician
7.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Technician A says that disc brakes are self-adjusting and the brake pedal height should not become lower as the disc brake pads wear. Technician B says that as the disc brake pads wear, the level of brake fluid in the master cylinder reservoir drops. Which technician is correct?
Technician A only
Technician B only
Both technicians
Neither technician
Access all questions and much more by creating a free account
Create resources
Host any resource
Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever
or continue with

Microsoft
%20(1).png)
Apple
Others
Already have an account?