wireless 50 a 100

Refer to the exhibit. An engineer implemented the CPU ACL on your Cisco 5520 Series Wireless LAN Controller, and the controller is no longer manageable via the network. What must be changes on this CPU ACL to enable it to manage the controller again?

• • A. Permit statements must be added to the top of the ACL in both directions, which specify the network to be managed from and the virtual interface of the controller.

• • B. Line 1 must be set to a destination port of HTTP.

• • C. Permit statements must be added to the top of the ACL, which specify the network to be managed from.

• • D. Line 1 must be set to the inbound direction.

A Cisco 8540 WLC manages Cisco Aironet 4800 Series Aps and send AoA data to a Cisco CMX 3375 Appliance for Hyperlocation. The load from the WLC is distributed to another virtual CMX server using CMX grouping. The virtual CMX server shows location RSSI data and not Hyperlocation. No AoA metrics are shown on the metrics page of the CMX virtual appliance under System > Metrics > Location Metrics. How must the network administrator resolve this issue?

• • A. Enable Wireless > Access Points > Global configuration > Enable Hyperlocation on the WLC.

• • B. Enable the HALO module on the CMX appliance for the data collection.

• • C. Allow port 2003 for AoA packets to flow through between the CMX appliances.

• • D. Use one Hyperlocation-enabled WLC and CMX for AoA data.

A customer wants the APs in the CEO's office to have different usernames and passwords for administrative support than the other APs deployed throughout the facility. Which feature must be enabled on the WLC and APs to achieve this goal?

• • A. local management users

• • B. HTTPS access

• • C. 802.1X supplicant credentials

• • D. override global credentials

A network engineer created a new wireless network that will be used for guest access. The corporate network must utilize all rates. The guest network must use only lower rates instead of 802.11n data rates. To what must the WMM policy of the WLAN be set to accomplish this task?

• • A. required

• • B. allowed

• • C. disabled

• • D. mandatory

A network is set up to support wired and wireless clients. Both types must authenticate using 802.1X before connecting to the network. Different types of client authentication must be separated on a Cisco ISE deployment. Which two configuration items achieve this task? (Choose two.)

• • A. device profiles

• • B. policy sets

• • C. separate networks

• • D. policy groups

• • E. policy results

When configuring a large, high-availability wireless network, which change to a mobility group creates less load on the controllers and maintains the same mobility messages?

• • A. Configure mobility group multicast messaging.

• • B. Remove unnecessary controllers from the mobility group.

• • C. Configure the controllers into separate RF groups from the mobility groups.

• • D. Separate the controllers into different mobility groups per controller.

A customer is concerned that their wireless network is detecting spurious threats from channels that are not being used by their wireless infrastructure. Which two technologies must they deploy? (Choose two.)

• • A. FlexConnect mode

• • B. monitor mode

• • C. sniffer mode with no submode

• • D. local mode with WIPS submode

• • E. rogue detector mode

a network engineer needs to configure multicast inthe network. the implementation will use multiple multicast groups and pim routers, which address provides automatic discovery of the best rp for each multicast group?

• 224.0.1.39

• 224.0.0.13

• 224.0.0.14

• 224.0.1.40

An IT administrator deployed an OEAP to the home of a remote user, but the OEAP cannot reach the WLC. Which two configuration settings must be completed before an OEAP is deployed successfully? (Choose two.)

• • A. Configure Secondary Controller Name and Management IP address in the High Availability tab.

• • B. Configure LSC to authorize the OEAP.

• • C. Configure the AP mode to FlexConnect and check the box for Office Extend AP.

• • D. Configure the WLC with an external IP address on the virtual interface.

• • E. Configure Primary Controller Name and Management IP address in the High Availability tab.

Refer to the exhibit. An engineer is configuring a Cisco wireless LAN controller and needs wireless multicast to use the 54Mbps rates. Which action meets this requirement?

• • A. Change the 24 Mpbs to Supported.

• • B. Set all data rates below 54 Mbps to Supported.

• • C. Change the 54 Mpbs to Mandatory.

• • D. Set all data rates below 54 Mbps to Disable.