Which of the following statements describes a key principle of software testing

B. For a software system, it is normally impossible to test all the input and output combinations.

A. Automated tests allow better statements of confidence about the quality of software products

C. Exhaustive software testing is, with enough effort and tool support, feasible for all software.

D. The purpose of software testing is demonstrating the absence of defects in software products.

Which rule should not be followed for reviews

C. All members of the reviewing team are responsible for the result of the review

A. Defects and issues are identified and corrected

B. The product is reviewed not the producer

D. Each review has a clear predefined objective

Which of the following are good candidates for manual static testing

B. Requirement specifications, test cases, user guides.

A. Requirement specifications, test plan, code, memory leaks.

C. Requirement specifications, user guides, performance.

D. Requirement specifications, website, code, use cases.

Which of the following could be a disadvantage of independent testing

D. Developers can lose a sense of responsibility for quality.

A. Developer and independent testing will overlap and waste resources.

B. Communication is limited between independent testers and developers.

C. Independent testers are too slow and delay the project schedule.

Which of the following could be a reason for a failure 1) Testing fault 2) Software fault 3) Design fault 4) Environment Fault 5) Documentation Fault

D. All of them are valid reasons for failure

A. 2 is a valid reason; 1,3,4 & 5 are not

B. 1,2,3,4 are valid reasons; 5 is not

C. 1,2,3 are valid reasons; 4 & 5 are not

Test are prioritized so that:

B. You do the best testing in the time available

A. You shorten the time required for testing

C. You do more effective testing

Which of the following statements about component testing is not true

D. Component testing does not involve regression testing

A. Component testing should be performed by development

B. Component testing is also know as isolation or module testing

C. Component testing should have completion criteria planned

Equivalence partitioning is:

C. A black box testing technique appropriate to all levels of testing

A. A black box testing technique used only by developers

B. A black box testing technique than can only be used during system testing

D. A white box testing technique appropriate for component testing

Which of the following is the main purpose of the integration strategy for integration testing in the small

C. To specify which modules to combine when and how many at once

A. To ensure that all of the small modules are tested adequately

B. To ensure that the system interfaces to other systems and networks

D. To ensure that the integration testing can be performed by a small team

E. To specify how the software should be divided into modules

Which expression best matches the following characteristics or review processes: 1. Led by author 2. Undocumented 3. No management participation 4. Led by a trained moderator or leader 5. Uses entry exit criteria s) Inspection t) Peer review u) Informal review v) Walkthrough

B. s = 4 and 5, t = 3, u = 2, v = 1

A. s = 4, t = 3, u = 2 and 5, v = 1

C. s = 1 and 5, t = 3, u = 2, v = 4

D. s = 5, t = 4, u = 3, v = 1 and 2

E. s = 4 and 5, t = 1, u = 2, v = 3

Given the following types of tool, which tools would typically be used by developers and which by an independent test team: i. Static analysis ii. Performance testing iii. Test management iv. Dynamic analysis v. Test running vi. Test data preparation

B. Developers would typically use i and iv; test team ii, iii, v and vi

A. Developers would typically use i, iv and vi; test team ii, iii and v

C. Developers would typically use i, ii, iii and iv; test team v and vi

D. Developers would typically use ii, iv and vi; test team I, ii and v

E. Developers would typically use i, iii, iv and v; test team ii and vi

Which of the following statements is NOT true:

D. Inspection is appropriate even when there are no written documents

A. Inspection is the most formal review process

B. Inspections should be led by a trained leader

C. Managers can perform inspections on management documents

E. Inspection compares documents with predecessor (source) documents

What can static analysis NOT find

C. Whether the value stored in a variable is correct

A. The use of a variable before it has been defined

D. The re-definition of a variable before it has been used

What statement about expected outcomes is FALSE:

A. Expected outcomes are defined by the software's behaviour

B. Expected outcomes are derived from a specification, not from the code

C. Expected outcomes include outputs to a screen and changes to files and databases

D. Expected outcomes should be predicted before a test is run

E. Expected outcomes may include timing constraints such as response times

Which of the following helps in monitoring the Test Progress: i. Percentage of Test Case Execution ii. Percentage of work done in test environment preparation. iii. Defect Information e.g. defect density, defects found and fixed iv. The size of the testing Team and skills of the engineers

B. i,ii,iii are correct and iv is incorrect

A. iv is correct and i,ii,iii are incorrect

C. i,ii are correct and iii,iv are incorrect

D. i,iv are correct and ii , iii are incorrect

Which of the following is true about White and Black Box Testing Technique

C. Equivalence partitioning , State Transition , Use Case Testing are black box Testing Techniques.

A. Equivalence partitioning, Decision Table and Control flow are White box Testing Techniques.

B. Equivalence partitioning, Boundary Value Analysis , Data Flow are Black Box Testing Techniques.

D. Equivalence Partitioning, State Transition, Use Case Testing and Decision Table are White Box Testing Techniques.

Which of the following is not phase of the Fundamental Test Process

B. Test implementation and Execution

Evaluating testability of the requirements and system are a part of which phase:-

C. Test Implementation and execution

A piece of software has been given _______what tests in the Following will you perform 1) Test the areas most critical to business processes 2) Test the areas where faults will be maximum 3) Test the easiest functionalities

A. 1&2 are true and 3 is false.

Exclusive use of white box testing in a test-phase will:

C. Run the risk that the requirements are not satisfied.

A. Ensure the test item is adequately tested.

B. Make the need for black-box testing redundant.

D. Suffices for the unit testing phase.

The following list contains risks that have been identified for a software product to be developed. Which of these risks is an example of a product risk

A. Not enough qualified testers to complete the planned tests

B. Software delivery is behind schedul

D. 3rd party supplier does not supply as stipulated

A test engineer is testing a Video Player (VCR), and logs the following report: Title: Fast Forward stops after 2 minutes. It happens every time Expected result: Fast forward continues till the end of the tape Severity: High Priority: Urgent What important information did the engineer leave out

A. Identification (Software and hardware) of the VCR

D. Ideas for the test case improvement

Equivalence partitioning consists of various activities:

A. Ensure that test cases test each input and output equivalence class at least once

B. Identify all inputs and all outputs

C. Identify equivalence classes for each input

SWT301_PART4

Quiz

•

Other

•

University

•

Practice Problem

•

Hard

Phạm Ngân

FREE Resource

121 questions

Show all answers

1.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Test summary report

A. Functional testing is mostly

B. Validation techniques

C. Verification techniques

D. Both of the above

E. None of the above

2.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

In a Examination a candidate has to score minimum of 24 marks inorder to clear the exam. The maximum that he can score is 40
marks. Identify the Valid Equivalance values if the student clears the exam.

A. 22,23,26

B. 21,39,40

C. 29,30,31

D. 0,15,22

3.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Verification involves which of the following :-
i. Helps to check the usality of the built product
ii. Helps to check that we have built the right product.
iii. Helps in developing the product
iv. Monitoring tool wastage and obsoleteness.

A. Options i,ii,iii,iv are true.

B. i is true and ii,iii,iv are false

C. i,ii,iii are true and iv is false

D. ii is true and i,iii,iv are false.

4.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Hand over of Testware is a part of which Phase

A. Test Analysis and Design

B. Test Planning and control

C. Test Closure Activities

D. Evaluating exit criteria and reporting

5.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

In a risk-based approach the risks identified may be used to :
i. Determine the test technique to be employed
ii. Determine the extent of testing to be carried out
iii. Prioritize testing in an attempt to find critical defects as early as possible.
iv. Determine the cost of the project

A. ii is True; i, iii, iv & v are False

B. i,ii,iii are true and iv is false

C. ii & iii are True; i, iv are False

D. ii, iii & iv are True; i is false

6.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

Static analysis tools are typically used by

A. Testers

B. Developers

C. Testers & Developers

D. None

7.

MULTIPLE CHOICE QUESTION

30 sec • 1 pt

The specification which describes steps required to operate the system and exercise test cases in order to implement the associated test design

A. Test Case Specification

B. Test Design Specification

C. Test Procedure Specification

D. None

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Classlink

Continue with Clever

or continue with

Microsoft

Apple

Others

Already have an account?

Similar Resources on Wayground

116 questions

ÔN TẬP

Quiz

•

University

120 questions

Top 300 #320

Quiz

•

University

120 questions

ГЕОДЕЗИЯ 120

Quiz

•

University

116 questions

Cơ sở lý thuyết truyền tin - Giữa kỳ

Quiz

•

University

123 questions

BÀO CHẾ 124-247

Quiz

•

University

120 questions

GDQP HP3

Quiz

•

University

120 questions

ON THI DGTKT_ LYCAODUYBAO

Quiz

•

University

121 questions

),= fizj

Quiz

•

University

Popular Resources on Wayground

15 questions

Fractions on a Number Line

Quiz

•

3rd Grade

20 questions

Equivalent Fractions

Quiz

•

3rd Grade

25 questions

Multiplication Facts

Quiz

•

5th Grade

54 questions

Analyzing Line Graphs & Tables

Quiz

•

4th Grade

$fractions$

22 questions

fractions

Quiz

•

3rd Grade

20 questions

Main Idea and Details

Quiz

•

5th Grade

20 questions

Context Clues

Quiz

•

6th Grade

15 questions

Equivalent Fractions

Quiz

•

4th Grade

Discover more resources for Other

7 questions

How James Brown Invented Funk

Interactive video

•

10th Grade - University

5 questions

Helping Build the Internet: Valerie Thomas | Great Minds

Interactive video

•

11th Grade - University

12 questions

IREAD Week 4 - Review

Quiz

•

3rd Grade - University

23 questions

Subject Verb Agreement

Quiz

•

9th Grade - University

7 questions

Renewable and Nonrenewable Resources

Interactive video

•

4th Grade - University

19 questions

Review2-TEACHER

Quiz

•

University

15 questions

Pre2_STUDENT

Quiz

•

University

20 questions

Ch. 7 Quadrilateral Quiz Review

Quiz

•

KG - University

SWT301_PART4

121 questions

Test summary report

In a Examination a candidate has to score minimum of 24 marks inorder to clear the exam. The maximum that he can score is 40
marks. Identify the Valid Equivalance values if the student clears the exam.

Verification involves which of the following :-
i. Helps to check the usality of the built product
ii. Helps to check that we have built the right product.
iii. Helps in developing the product
iv. Monitoring tool wastage and obsoleteness.

Hand over of Testware is a part of which Phase

In a risk-based approach the risks identified may be used to :
i. Determine the test technique to be employed
ii. Determine the extent of testing to be carried out
iii. Prioritize testing in an attempt to find critical defects as early as possible.
iv. Determine the cost of the project

Static analysis tools are typically used by

The specification which describes steps required to operate the system and exercise test cases in order to implement the associated test design

Test Case are grouped into Manageable (and scheduled) units are called as

Which of the following statements are TRUE for informal reviews
I. Easy to get started and have some benefit
II. Have no or minimal formal process
III. The process must be documented
IV. May include "paired programming"

Which of the following statements describes a key principle of software testing

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Other

SWT301_PART4

121 questions

Test summary report

In a Examination a candidate has to score minimum of 24 marks inorder to clear the exam. The maximum that he can score is 40marks. Identify the Valid Equivalance values if the student clears the exam.

Verification involves which of the following :-i. Helps to check the usality of the built productii. Helps to check that we have built the right product.iii. Helps in developing the productiv. Monitoring tool wastage and obsoleteness.

Hand over of Testware is a part of which Phase

In a risk-based approach the risks identified may be used to :i. Determine the test technique to be employedii. Determine the extent of testing to be carried outiii. Prioritize testing in an attempt to find critical defects as early as possible.iv. Determine the cost of the project

Static analysis tools are typically used by

The specification which describes steps required to operate the system and exercise test cases in order to implement the associated test design

Test Case are grouped into Manageable (and scheduled) units are called as

Which of the following statements are TRUE for informal reviewsI. Easy to get started and have some benefitII. Have no or minimal formal processIII. The process must be documentedIV. May include "paired programming"

Which of the following statements describes a key principle of software testing

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Other

In a Examination a candidate has to score minimum of 24 marks inorder to clear the exam. The maximum that he can score is 40
marks. Identify the Valid Equivalance values if the student clears the exam.

Verification involves which of the following :-
i. Helps to check the usality of the built product
ii. Helps to check that we have built the right product.
iii. Helps in developing the product
iv. Monitoring tool wastage and obsoleteness.

In a risk-based approach the risks identified may be used to :
i. Determine the test technique to be employed
ii. Determine the extent of testing to be carried out
iii. Prioritize testing in an attempt to find critical defects as early as possible.
iv. Determine the cost of the project

Which of the following statements are TRUE for informal reviews
I. Easy to get started and have some benefit
II. Have no or minimal formal process
III. The process must be documented
IV. May include "paired programming"