Woods I Final Review

What kind of cuts are made with a bandsaw?

• Crosscuts

• Rip cuts

• Curved cuts

• Any cuts you want

What kind of cuts are made with a table saw?

• Crosscuts

• Rip cuts

• Curved cuts

• Any cuts you want

What kind of cuts are made with a miter saw?

• Crosscuts

• Rip cuts

• Curved cuts

• Any cuts you want

Where should the guard be positioned on the bandsaw?

• Up to 1/4" above the stokc

• Up to 1/8" above the stock

• Up to 1/2" above the stock

• Up to 1" above the stock

What is the purpose of relief cuts?

• They are special cuts for softwood

• They are special cuts for hardwood

• They prevent the blade from binding

• The are quick, rough cuts

When is it safe to put your hand in line with the blade of the bandsaw?

• When your hand is at least 4" from the blade

• When your hand is at least 2" from the blade

• When your hand is at least 6" from the blade

• When the machine is off

What do you do if you need to back out of a cut on the bandsaw?

• Leave the power on, so it comes out smoothly

• Leave the power on, but reduce the blade speed

• Leave the power on and loosen the blade tension

• Turn the power off and wait for the blade to stop

How should the miter saw be held after the cut is finished but before the blade stops moving?

• The down position

• Raised 1" above the cut stock

• The up position

• Pull the saw all the way out

Hands should never be closer than _____ inches to the blade when using the miter saw

• 2

• 4

• 6

• 8

Where should the saw blade be aligned when making a cut on the miter saw?

• On the right side of the line

• On the left side of the line

• On the waste side of the line

• On the marking line