Wheel Alignment Using a Hunter Alignment Machine

What is the name of the alignment machine used in the demonstration?

• TechAligner

• AutoAlign 3000

• Hunter WinAlign

• AlignPro

What type of rack is typically used in alignment shops?

• Lift Rack

• Scissor Jack

• Pit Rack

• Drive-On Rack

What system might require the alignment machine to know the steering direction?

• Fuel Injection System

• Transmission Control System

• Lane Departure Warning System

• Air Conditioning System

What is the purpose of performing a rolling compensation?

• To ensure the sensors are mounted correctly

• To check the wheel's rotation speed

• To adjust the tire pressure

• To calibrate the machine's sensors

What is the purpose of the steering wheel lock mentioned in the process?

• To prevent the car from moving

• To lock the wheels in place

• To keep the steering wheel straight during adjustments

• To measure the steering wheel's angle

What is the significance of the toe setting in wheel alignment?

• It determines the wheel's angle from top to bottom

• It affects the vehicle's fuel efficiency

• It adjusts the suspension's stiffness

• It controls the direction the wheels point towards

What might cause a vehicle to pull to one side according to the caster settings?

• If the caster settings are within the manufacturer's specifications

• If the caster is more negative on the left side

• If one side's caster is more positive than the other

• If the caster is the same on both sides

What does the thrust angle represent in wheel alignment?

• The direction the rear tires are pointing

• The height difference between the front and rear tires

• The angle of the steering wheel

• The pressure difference in the tires

What might a difference in caster settings indicate?

• That the wheels are of different sizes

• That the vehicle's speed is too high

• A potential pull to one side while driving

• Incorrect tire pressure

Why is it important to check the alignment with a tape measure after adjustments?

• To ensure the tires are inflated properly

• To verify the sensors are still functioning

• To confirm the wheels are pointing straight ahead

• To measure the distance between the wheels