7290-151 - 2 Vehicle Maintenance LV2 Revision

When checking engine oil level, it should be done while the engine is ...

• Running

• Turned off

• Warm

• Cold

Answer explanation

When checking engine oil level, it should be done while the engine is cold to get an accurate reading.

The recommended interval for changing engine oil is typically every ...

• 5,000 miles

• 10,000 kilometers

• 20,000 miles

• 30,000 kilometers

Answer explanation

The correct interval for changing engine oil is typically every 5,000 miles.

Which of the following is NOT a component checked during an engine maintenance inspection?

• Cooling system

• Transmission

• Belts and hoses

• Air filter

Answer explanation

The transmission is NOT a component checked during an engine maintenance inspection.

The correct tire pressure for a vehicle is usually indicated in the ...

• Owner's manual

• Manufacturer's website

• Tire tread

• Fuel gauge

Answer explanation

The correct tire pressure for a vehicle is usually indicated in the owner's manual, making it the correct choice.

When inspecting the coolant level in the radiator, it should be ...

• Filled to the brim

• Checked when hot

• Checked when cold

• Slightly below the minimum mark

Answer explanation

The coolant level in the radiator should be checked when cold to get an accurate reading.

What is the purpose of checking the transmission fluid level in a vehicle?

• To top up when low

• To keep the engine cool

• To improve fuel efficiency

• To ensure smooth gear shifts

Answer explanation

Checking the transmission fluid level in a vehicle is important to ensure smooth gear shifts.

During a routine maintenance check, the air filter should be inspected and replaced if ...

• Dirt and debris are visible

• The engine is running rough

• There is a strange noise

• Smells unpleasant

Answer explanation

During a routine maintenance check, the air filter should be inspected and replaced if dirt and debris are visible.

The correct method for checking tire tread depth is by using a ...

• Coin

• Ruler

• Pressure gauge

• Magnet

Answer explanation

The correct method for checking tire tread depth is by using a coin, as it provides a quick and easy way to measure the depth.

When checking the battery, it is important to look for signs of ...

• Low engine power

• Corrosion

• Excessive tire wear

• Overheating

Answer explanation

When checking the battery, it is important to look for signs of corrosion, as it can indicate potential issues with the battery terminals and connections.

What is the recommended interval for replacing the timing belt in most vehicles?

• 30,000 miles

• 60,000 kilometers

• 90,000 miles

• 120,000 kilometers

Answer explanation

The recommended interval for replacing the timing belt in most vehicles is 60,000 kilometers.