Ham Radio Questions T1B

Which of the following frequency ranges are available for phone operation by Technician licensees?

• 28.050 MHz to 28.150 MHz

• 28.100 MHz to 28.300 MHz

• 28.300 MHz to 28.500 MHz

• 28.500 MHz to 28.700 MHz

Which amateurs may contact the International Space Station (ISS) on VHF bands?

• Any amateur holding a General class or higher license

• Any amateur holding a Technician class or higher license

• Any amateur holding a General class or higher license who has applied for and received approval from NASA

• Any amateur holding a Technician class or higher license who has applied for and received approval from NASA

Which frequency is in the 6 meter amateur band?

• 49.00 MHz

• 52.525 MHz

• 28.50 MHz

• 222.15 MHz

Which amateur band includes 146.52 MHz?

• 6 meters

• 2 meters

• 1.25 meters

• 70 centimeters

How may amateurs use the 219 to 220 MHz segment of 1.25 meter band?

• Spread spectrum only

• Fast-scan television only

• Emergency traffic only

• Fixed digital message forwarding systems only

On which HF bands does a Technician class operator have phone privileges?

• None

• 10 meter band only

• 80 meter, 40 meter, 15 meter, and 10 meter bands

• 30 meter band only

Which of the following VHF/UHF band segments are limited to CW only?

Which frequency range is correct for the 6-meter band according to the image?

• 50.0 MHz to 50.1 MHz and 144.0 MHz to 144.1 MHz

• 219 MHz to 220 MHz and 420.0 MHz to 420.1 MHz

• 902.0 MHz to 902.1 MHz

• All these choices are correct

How are US amateurs restricted in segments of bands where the Amateur Radio Service is secondary?

• U.S. amateurs may find non-amateur stations in those segments, and must avoid interfering with them

• U.S. amateurs must give foreign amateur stations priority in those segments

• International communications are not permitted in those segments

• Digital transmissions are not permitted in those segments

Why should you not set your transmit frequency to be exactly at the edge of an amateur band or sub-band?

• To allow for calibration error in the transmitter frequency display

• So that modulation sidebands do not extend beyond the band edge

• To allow for transmitter frequency drift

• All of the above are correct reasons