Sewing Terms and Parts of the Machine

Match the following

• bobbin

• used to unpick small stitches

• pinking shears

• shears used to cut a zig-zag edge on fabric

• measuring tape

• used to cute very straight, clean lines in fabric

• seam ripper

• flexible piece of equipment used to measure body measurements and long distances

• rotary cutter

• Small spool around which the lower thread of the sewing machine is wound

Match the following

• seam gauge

• cutting tool used only for cutting fabric

• thimble

• a metal wheel used to transfer pattern marking fabric

• marking pencil

• 6” metal ruler with a sliding marker

• tracing wheel

• used to protect fingers while sewing

• shears

• used to draw patterns onto fabric.

Which part of the sewing machine opens to allow you to put the bobbin and the case in the machine?

• sewing machine

• bobbin cover

• needle stitch plate

• spool holder

What is the needle stitch plate?

• a machine with a mechanically driven needle for sewing or stitching cloth.

• it holds fabric down against the feed dogs to move the fabric through the machine

• the metal plate underneath the presser food where seam allowance guidelines are found.

Where is the thread cutter?

• On the front of the machine

• on the bottom of the machine

• on the back of the machine

• on the side of the machine

Match the following

• bobbin cover

• holds the fabric down against the feed dogs to move the fabric through the machine

• presser foot

• the metal plate underneath the presser foot where seam allowance guidelines are found.

• feed dogs

• toothed metal piece below the stitch plate that pushes the fabric beneath the presser foot

• sewing machine

• A machine with a mechanically driven needle for sewing or stitching cloth

• needle stich plate

• opens to allow you to put the bobbin and bobbin case in the machine

Match the following

• thread cutter

• the sharp tool that pierces the fabric while sewing

• reverse backstitch

• pulls the thread from the spool pin. Must be at its highest point before sewing

• needle

• on the back of the machine, raises and lowers the presser foot

• chicken head (thread take-up lever)

• a cutting tool on side of the machine that allows for east thread cutting

• pressure foot lever

• when pressed, it allows you to sew backwards

Match the following

• handwheel

• manually raises and lowers needle

• power switch

• controls the tightness or looseness of the thread

• tension dial

• provides tension when winding thread around the bobbin

• bobbin pre-tension

• on the right side of the machine, allows user to turn the machine on and off

label the sewing machine

a

b

c

d

e

f

g

h

i

j

bobbin

stitch selector

needle

spool

bobbin Winder

thread cutter

reverse/backstitch

bobbin pre-tension

thread take up lever

turning wheel