Pre Course WAH & PTW

What is considered "Working at Height"?

• Any work above 1 meter from the ground

• Only work on ladders or scaffolding.

• Any work where there is a risk of falling a distance that could cause injury.

• Only work on roofs.

1. Before working at height, you should always:

• Ask a colleague to hold the ladder for you

• Check the weather forecast for strong winds

• Conduct a risk assessment and select appropriate equipment

• Use the highest ladder available to reach the work area

1. Which type of fall protection system is NOT suitable for all situations?

• Guardrails and toe-boards

• Lanyards with harnesses

• Fall arrest system

• Safety nets

1. What should you do if you witness someone working at height unsafely?

• Ignore it, as it's not your responsibility

• Politely offer your help and explain the safety concerns

• Report it to your supervisor immediately

• Offer to hold the ladder for them

What are the three main components of a personal fall arrest system?

• Harness, lanyard, and anchor point

• Helmet, gloves, and safety glasses

• Ladder, platform, and guardrail

• First-aid kit, fire extinguisher, and emergency contact information

You are working on a scaffold. What is the most important thing to check before starting work?

• The weather conditions

• The tools and equipment you are using

• The stability and integrity of the scaffold

• Your personal fall arrest system is properly attached

What are the main potential hazards associated with working at height?

• Falling from the work platform

• Falling objects from above

• Electrocution from overhead power lines

• All of the answer

What are two main types of fall protection systems used at height?

• Barrier systems and warning signs

• Fall arrest systems and travel restraint systems

• Guardrails and toe boards

• Ladders and scaffolding

You're using a ladder. How many points of contact should you maintain at all times?

• Two (hands or feet).

• Three (two hands and one foot)

• Four (both hands and both feet)

• The number depends on the height of the ladder

You are using a personal fall arrest system (PFAS). What should you inspect before each use?

• Only the harness and lanyard

• All components, including the anchor point and lifeline

• Just the labels for any damage or wear

• You don't need to inspect it, it's pre-inspected