
Cold Water Supply Systems L3P1,U5,LO2.1.p2.
Quiz
•
Science
•
Professional Development
•
Practice Problem
•
Hard

Craig Boothright
FREE Resource
Enhance your content
7 questions
Show all answers
1.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
What is the purpose of the accumulator in a pumped supply with pressure control system?
To sense pressure drop on the system
To control the level of water in the cold water storage cistern
To filter and sterilize the water
To maintain system pressure and store water for use when the pump is not running
2.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
What is the usual operating pressure range for pumped supply with pressure control systems?
3 to 5 bar
5 to 7 bar
7 to 10 bar
1.5 to 3 bar
3.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
What is the purpose of the non-return valve or check valve in the pumped supply with pressure control system?
To control the level of water in the cold water storage cistern
To sense pressure drop on the system
To maintain system pressure and store water for use when the pump is not running
To prevent backflow of water into the accumulator
4.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
What is the purpose of the electrically operated float switch in the pumped supply with level control system?
To control the level of water in the cold water storage cistern
To sense pressure drop on the system
To prevent backflow of water into the accumulator
To maintain system pressure and store water for use when the pump is not running
5.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
What is the effect of turning on a tap in a pumped supply with pressure control system?
The pump is switched on and the cistern requires water
The cistern continues to fill until the water level is high enough to close the float switch
The pump starts and the system pressure is maintained
The pressure forces water out of the accumulator
6.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
What is the effect of turning off a tap in a pumped supply with pressure control system?
The pressure forces water out of the accumulator
The pump continues refilling the accumulator until it is at full pressure and capacity again
The cistern requires water and the pump is switched on
The pump starts and the system pressure is maintained
7.
FILL IN THE BLANK QUESTION
1 min • 4 pts
Starting at the top and working down the accumulator
S_______ under protective cap.
A__ compresses under pressure.
Bladder is made from S________ rubber.
contents of the blue shaded area _____
Similar Resources on Wayground
10 questions
Jurnal Club Pariet: TWICE
Quiz
•
Professional Development
10 questions
Introduction to Anatomy
Quiz
•
University - Professi...
11 questions
KOE034: Sensors and Instruments
Quiz
•
Professional Development
10 questions
Microwave Tubes
Quiz
•
University - Professi...
11 questions
Catering
Quiz
•
Professional Development
12 questions
Cloud QUIZ
Quiz
•
University - Professi...
10 questions
OUR EARTH
Quiz
•
4th Grade - Professio...
10 questions
STEM QUIZ
Quiz
•
Professional Development
Popular Resources on Wayground
20 questions
Brand Labels
Quiz
•
5th - 12th Grade
11 questions
NEASC Extended Advisory
Lesson
•
9th - 12th Grade
10 questions
Ice Breaker Trivia: Food from Around the World
Quiz
•
3rd - 12th Grade
10 questions
Boomer ⚡ Zoomer - Holiday Movies
Quiz
•
KG - University
25 questions
Multiplication Facts
Quiz
•
5th Grade
22 questions
Adding Integers
Quiz
•
6th Grade
10 questions
Multiplication and Division Unknowns
Quiz
•
3rd Grade
20 questions
Multiplying and Dividing Integers
Quiz
•
7th Grade