Choke Control Panel

When connecting the control panel to the rig air compressor, it is important to pay attention to...

• the air pressure gauge.

• the hydraulic pressure gauge.

• the hydraulic fluid levels.

• the accumulator.

While connecting any high-pressure hose, it is important to always use the _______ for safety.

• whip check

• check valve

• ball valve

• pressure gauge

When rigging up the control panel it is important to...

• secure the hoses on the bar with tape or a rope before using a control decent to the ground without a spotter.

• secure the hoses on the bar with tape or a rope before using a control decent to the ground.

• secure the hoses on the bar with tape or a rope before using a control decent to the ground with a spotter that has not secured the area.

• secure the hoses on the bar with tape or a rope before using a control decent to the ground with a spotter that has secured the area with warning tape.

In order to purge the hydraulic lines of hydraulic fluid using air pressure from the control panel, you will need to open...

• the small pump and bleed off valve.

• the bleed off valve and the accumulator.

• the large pump, accumulator, and the bleed off valve.

• the large pump and bleed off valve.

After you fill the accumulator tanks with hydraulic fluid, which valve should NOT be left open?

• The ball valve near the hydraulic fluid tank.

• The large pump valve.

• The bleed off valve.

• The small pump valve.

The Iron Horse Tools Choke & Panel operates as a _____________.

• closed loop system

• well oiled machine

• hydraulic system

• non of the above

The PI cord connects to the transducers.

• True

• False

When connecting the high pressure and hydraulic hoses on a single or dual choke remote rig-up, the primary fitting location is always the______.

• the top fittings.

• the bottom fittings.

• it doesn't matter which fitting's location you use.

• None of the above

What is connected to the PSC Box?

• High Pressure Hose

• Hydraulic Hoses

• Pump Stroke Counter Cable

• Electrical Cord

The PI gauge shows_____.

• the pressure on the casing sensor

• the pressure on the drilling sensor

• the position of the choke

• the pump strokes