Cisco-test2

Which of the following statements accurately describes the power sharing and high availability settings available on Meraki access points?

• เมื่อมีการใช้งาน High Availability พลังงานจะถูกแบ่งปันระหว่างลิงค์

• การแบ่งปันพลังงานรวมกันกับพอร์ตเอเทอร์เน็ตคู่แทนที่จะอนุญาตให้มีการสลับเปลี่ยน PoE

• โหมด High Availability เป็นโหมดเริ่มต้นสำหรับส่วนใหญ่ของจุดเข้าถึงที่มีการเชื่อมต่อกับเอเทอร์เน็ตคู่

• ในโหมดแบ่งปันพลังงาน จุดเข้าถึงจะตรวจสอบสถานะลิงค์ของอินเทอร์เฟซสำรองทุก ๆ 5 วินาที

Can Meraki Air Marshal be used to limit access by sending deauthentication PMF packets with the MAC address of the attacked device to the rogue access device on an SSID operating at 6 GHz frequency using WPA3 security standard, in case of an Evil Twin attack?

• จริง

• เท็จ

The car company is looking for a way to live stream the promotion for their new car. The demonstration will take place in a location that has not yet developed internet infrastructure. What should the company consider when deciding on their network infrastructure?

• 5G has higher bandwidth and lower latenct than 4G

• Loud noises may interfere with wireless signals

• Weather conditions may affect the performance of cellular

• MG can have dual SIM cards, each from different providers, reducing the risk of interference

Your network is currently using the client connection limiting option from the default SSID  For the client connection limiting option from the default SSID for Air Marshal, what will it do to limit your network when using this option?

• Prevent clients from connecting to access points classified as fake SSIDs

• Prevent clients from connecting to access points classified as other SSIDs

• Block access to the network connected to access points classified as fake SSIDs

• Prevent clients from connecting to access points classified as fake SSIDs

Under which environmental conditions can you use the MT temperature and humidity sensor?

• Outdoors

• Indoors

• Cold room

• Industrial heating

• Water environment

Which Meraki device can integrate with MT sensor as a gateway?

• Meraki MV camera

• Meraki MR access point

• Meraki IoT gateway

• Meraki MG cellular gateway

What are two ways to enhance network security with device tags? 

• Creating a report of all wireless network devices connecting to neighboring access points outside your organization’s wall

• Pairing a VLAN tag with a specified network device tag to limit the scope of VLAN utilization

• Broadcasting a guest wireless network specifically during business hours and restricting access on weekends

• Offering seamless connectivity to all wireless users by operating only a single VLAN across all deployed access points

What are two solutions to provide the appropriate power needed to supply an access point requiring 802.3bt PoE power for full feature utilization? 

• Connect the access point to two 802.3af PoE Ethernet ports

• Connect the access point to a Cisco Meraki multigigabit PoE injector

• Connect the access point to one 802.3af PoE Ethernet port and a second 802.3at PoE Ethernet port

• Connect the access point to a single 802.3bt PoE Ethernet port or two 802.3at PoE Ethernet ports

What are two methods of applying a static IP address to a Meraki wireless access point? 

• Utilizing the edit icon next to LAN IP on the Access point page within the dashboard

• Utilizing the edit icon next to Address and entering the physical address of your access point

• Connecting a laptop to the access point on the wired uplink port and browsing to http://208.67.220.220

• Connecting a laptop wirelessly to an SSID broadcasted by the access point and browsing to http://ap.meraki.com

When we talk about the tags of Systems Manager, which of the following statements is true?

• Tags specify the security policies that all devices should use

• Tags specify groups of devices

• SM can automatically create some tags based on conditions of devices at some point

• All tags are static and must be created manually