14/11/2023

You are a solo student at West Melton what runways must you not undertake a touch and go landing?

• When using runway 35

• When using runway 17

• When using runway 11

• When using runway 29

• When using sealed runway 22

What are the criteria to meet stable gate requirements on a normal approach? (tick all that apply)

• The landing / final checklist is complete

• The aircraft is established on the correct flight path (lateral and vertical)

• The aircraft speed is not more than 10kt above, or 5kt below, target airspeed

• The aircraft is in the correct landing configuration or there is only one more stage of flap to be deployed to achieve the landing configuration

• Sink rate is no greater than 700 ft per minute; if an approach requires a sink rate greater than 700ft per minute, a special briefing should be conducted

For solo flights, under normal circumstances, in the event that two successive approaches are deemed unstable and a Go around is required, Pilots shall plan and execute either

• A change to a suitable runway at the same aerodrome

• A diversion to another, more suitable, aerodrome

No student shall practice maximum-rate turns solo below what height...

• 1500AGL

• 1500AMSL

• 1000AMSL

• 1000AMSL

What is the met minima at CH aerodrome for day VFR?

• Ceiling 1500ft

• Ceiling 600ft

• 5000m Visibility

• 1500m Visibility

To mitigate the risk of a near miss occurring during the Miners departure and arrival, when weather allows; aircraft on a Miners Departure shall maintain ft AMSL and aircraft on a Miners Arrival shall track as noted below and start a gradual descent to _ft between Aylesbury and West Junction. (Fill in the gaps)

• 1500, 1300

• 1300, 1500

• 1200, 1500

• 1500, 1200