Team WolfPack’s 4.2.2.4 Quizizz

What are the two common problems for a power supply? (Choose two)

• Insufficient power output and cable damage.

• The computer reboots and powers off unexpectedly.

• The power supply is incompatible.

• The computer won't power on.

• Incorrect voltage output and overloading.

1. Why is it reasonable to plug the computer into a good AC outlet?

• It ensures that the computer receives the correct voltage and current.

• Plugging the computer into a good AC outlet may improve internet speed.

• Plugging the computer into a good AC outlet ensures stable and consistent power flow, which can prevent damage to the computer and its components.

•  It prolongs the life of the power supply.

What can be a problem if the power supply is not turned on?

• The computer will not boot up.

• The computer will shut down unexpectedly.

• The computer will not display any graphics.

• Errors and crashes.

How do you correctly orient the power button to the front case panel connector and reconnect?

• Align the switch pins with the corresponding pins on the connector and press down firmly.

• Twist the switch until it fits into the connector and then press down firmly.

• Check the orientation of the switch pins and connector labels, then align and press down firmly with two prongs facing downward.

• Place the switch over the connector without aligning any pins and then press down firmly.

Why should you replace the GPU, if the GPU is causing the coloring pattern on a screen to be incorrect? (Choose two)

• It ensures proper functioning of the computer's graphics.

• The GPU is responsible for displaying graphics on the screen.

• Because replacing the GPU is cheaper than replacing the whole computer.

• It adjusts the monitor's settings to correct the color pattern issue on the screen.

Why would a computer run slower after installing a dual core CPU?

• Updated BIOS firmware.

• The CPU is in the wrong socket type.

• The BIOS does not recognize the dual core CPU.

• Too much cooling for the CPU.

What could be the cause of images on your screen flash line and change size?

• The LCD backlight is not properly adjusted.

• Dead pixels on the screen.

• burn-in.

• Overheated GPU.

Why would you restore the default motherboard settings?

• The front-side bus is set too high.

• Images on the screen are not refreshing fast enough.

• The CPU multiplier is set too high.

• The projector is enclosed.

What happens when the power supply switch is set to the wrong voltage?

• The CPU voltage changes.

• The computer will not turn on.

• The BIOS will restore the default settings.

• Burn-in.

What is one reason for the computer to not boot or lock up?

• The computer does not have enough RAM.

• The video card is loose.

• The CPU was replaced.

• The CPU is overheated.