LV08 Chassis Systems Test 4

When checking the output of an inductive ABS sensor with a multi meter, you would set it to.....

• 0-10 Amps

• 0-10v DC

• 0-20 Ohms

• 0-10v AC

During hard braking, an insecure load in the boot will slide forwards due to......

• Gravitational force

• Centrifugal force

• oscillational force

• Inertia force

For failsafe operation, the ABS solenoid valves are.....

• Held in the closed position

• Held in the open position

• Oscillate between open and closed

• Bypassed inside the modulator

Understeer is when:

• The front slip angle is smaller than the rear slip angle

• The front slip angle is the same as the rear slip angle

• The front slip angle is larger than the rear slip angle

• The rear slip angle is larger than the front slip angle

The acronym 'EBD' stands for

• Electronic Brake force Depressurisation

• Electronic Brake force Diversion

• Electronic Brake-force Distribution

• Electronic Brake force Diagnostics

When a wheel locks during the braking of a vehicle fitted with ABS, the modulator action will be:

• Pressure release, pressure maintain, pressure increase

• Pressure maintain, pressure release, pressure increase

• Pressure increase, Pressure Maintain, Pressure release

• Pressure maintain, Pressure increase, Pressure release

What 3 forces are coil springs subjected to during driving

• Shear, bending and compression

• Compression, shear and torsional

• Tension, compression, and shear

• Compression, tension and torsional

One cause of a vehicle having excessive front wheel tyre wear would be:

• Incorrect steering geometry

• Four-wheel steering is fitted

• Steering torque sensor is inoperative

• Incorrect rear wheel camber

The component that senses the driver's turning effort in an EPAS system is the.....

• Torque sensor

• steering speed sensor

• Flow control valve

• Power steering pump

If a vehicle has under inflated front tyres, it will have a tendency to:

• Understeer

• Wander

• Neutral steer

• Oversteer