Advaspire EV3 Assessment - Level 1-A

Which block can make your Driving Base move straight for 3 second?

下列哪个可以直线行走3秒?

• 
• 
• 
• 

On the EV3 Programmable brick, ports A,B,C and D are use for

EV3主要控制器上的 A、B、C、D 接口是用于

• Motor

  发动机

• Sensors

  感应器

• Connect the robot to the computer

  连接EV3到电脑

• Charge the robot

  为EV3充电

Which components below are the sensors available for the EV3?

下列哪个是EV3用的感应器？

• 
• 
• 
• 

The Driving Base turns 2 rotations on the wheel equals to ___ degrees.

Driving Base 的轮子转两圈相等于___度（ °）

• 540

• 720

• 360

• 180

According to the above, what will happen if the speed is changed to (-50)?

根据以上程序，请问把速度更改成(-50)会发生什么？

• move forward

  向前移动

• move forward with slow speed

  以缓慢的速度行走

• turn left

  向左转

• move backward

  向后移动

On the brick,the center button CANNOT be used to

在显示屏上，中间的按钮不可以用于

• Confirm Selection

  确定选项

• Turn on the robot

  开机

• Stop programs

  停止程序

• Run programs

  运行程序

Which is the CORRECT answer regarding the above component?

根据上图选择正确答案？

• This is a large motor

  这是EV3大型电机

• This is a gyro sensor

  这是EV3陀螺仪感应器

• This is a medium motor

  这是EV3中型电机

• This is an IR control

  这是EV3红外线控制器

• This is a brick

  这是Lego Brick

When the above program is downloaded and run, what will happen to the Driving Base?

当下载了上图的程序后启动程序，Driving Base机器人会发生什么？

• Driving Base will keep moving forward

  机器人会不断向前走

• Driving Base will move forward when red color is sensed, and stop if red color is not detected

  机器人在侦测到红色的时候会向前走，否则停止前行

• Driving Base will move forward when touch sensor is pressed, and stop if touch sensor is released.

  机器人在触感感应器被按下时向前走，放开时停止移动

• Driving Base will move forward for 1 rotation, then turn left

  机器人会向前走一圈，然后转左

What will likely to happen if this program is downloaded and run in Driving Base?

当这个程序被下载及启动在Driving Base机器人时，会发生什么？

• Driving Base will turn right, then move forward, then turn left, then move forward

  机器人会向右转，然后直走，向左转, 再向前走

• Driving Base will turn left, then move backward, then turn right, then move forward

  机器人会向左转，然后后退，向右转, 再向前走

• Driving Base will move forward, turn right, then move forward, then turn left

  机器人会向前走，然后向右转，然后直走，在向左转

• Driving Base will wait for 3 seconds, then turn left, then move forward non-stop

  机器人会等个3秒，然后向左转，再不断向前走

Which of the following program can make Driving Base to turn right around 90°?

以下哪个程序可以让Driving Base机器人向右转90°？

• 
• 
• 
•