INTERNATIONAL FUEL GAS CODE (Part 6)

CHAPTER 3 :  GENERAL REGULATIONS

304.5.1 Standard Method

Where the air infiltration rate of a structure is unknown, the minimum required volume of indoor combustions air shall be _______ cubic feet per 1,000 Btu/h of the appliance input rating.

• 50 cubic feet

• 60 cubic feet

• 70 cubic feet

• 80 cubic feet

CHAPTER 3 : GENERAL REGULATIONS

303.3 Prohibited Locations

Appliances shall not be located in _________  ___________, _________, ________ ________, _________ _________, or surgical rooms , or in a space that opens only such rooms or spaces.

(sleeping room/ bathrooms/ toilets rooms/ storage closets)

• sleeping room

• bathrooms

• toilets rooms

• storage closets

CHAPTER 3 : GENERAL REGULATIONS

303.4

  Appliances shall not be installed in a location subject to _______ ________ ________ except where protected by an approved means.

• ventilation impact damage

• vehicle impact damage

• heavy machine impact damage

• exhaust impact damage

CHAPTER 2 : DEFINITIONS

202 General Definition

The pressure of the weight of air and water vapor on the surface of the earth, approximately 14.7 pounds per square inch at sea level.

• Atmospheric Pressure

• Hydrogen Pressure

• Air Pressure

• Water Pressure

CHAPTER 2 : DEFINITIONS

202 General Definition

A self-contained appliance for supplying steam or hot water.

• Boiler, Low-Pressure

• Barometric Draft Regulators

• Bonding Jumper

• Counter Appliance

CHAPTER : SCOPE AND ADMINITRATIONS

107.6 Connection of Service Utilities

A person shall not make connections from a utility, source of energy, fuel or power to any building or system that is regulated by this code for which a permit is required until ______ by the code official.

• inspected

• authorized

• called

• marked

CHAPTER 4 : GAS PIPING INSTALLATIONS

411.1 Connecting Appliances, Item 8

For portable outdoor appliances, the listed gas hose connection shall be to the gas piping supply at an appliance shutoff valve, a listed ________-________ ______ or listed ________ _______ ________.

• gas convenience discharge

• quick-disconnected device

• gas convenience outlet

• timed-disconnected device

CHAPTER 2 : DEFINITIONS

202 General Definition

Any apparatus or device that utilized a fuel or a raw material as a fuel to produce light, heat, power, refrigeration or air conditioning.

• appliance

• boiler

• anodeless Riser

• burner

CHAPTER 3 : GENERAL REGULATIONS

304.10 Louvers and Grilles

Where the design and free area of louvres are not known, it shall be assumed that metal louvres and grilles will have _________ - per cent free area.

• 25 percent

• 45 percent

• 55 percent

• 75 percent

CHAPTER  3 : GENERAL REGULATIONS

303.7 Locations

Appliance installed in pits require a minimum clearance of ________ inches from the appliance to the sides of the pit.

• 8 inches

• 10 inches

• 12 inches

• 14 inches