How to identify the FC and RC fan in 2 door convertible

• Right

  side RC, Left side FC

• By

  Colour label Blue FC & white RC

• By

  colour label Blue RC & white FC

• Check

  ohms

How to enter Service test mode in new PRF

• within 10 sec of power on press and hold the RC button for 10 sec ( till 2nd beep)

• within 10 min of power on press and hold the RC button for 10 sec ( till 2nd beep)

• Close the door and press and hold the FC button for 10 sec ( till 1st beep)

• No test mode available

In convertible model test mode what is the code for compressor testing

• 4 & 6 LED

• 2, & 3 LED

• 2, 3 & 4 LED

• 3, 4 & 6 LED

What temperature setting is possible in Max flex compartment.

• -3 to +6

• -6 to +6

• -19 to +6

• -15 to -6

Phase, neutral and earth reading should be voltage

• P-N 220 ~240 / P-E 230~225 / N-E ≤ 5

• P-N 230 / P-E 230~240 / N-E ≤15

• P-N 230 / P-E 0~5 / N-E <25

• P-N 230 / P-E 0~ 110 / N-E ≤0

What is the Value of NTC sensor in room temperature

• 3 to 4 K

• 15 to 20 K

• 9 to 10 K

• 1 to 2 K

What is the minimum and maximum RPM for FAN in the new ref

• 300 to 3000

• 670 to 3350

• 450 to 4500

• 1000 to 2500

In Multi door model what are the important step to be followed while fixing the FC MAF

• Check Defrost sensor is placed in correct position

• Check thermal fuse placed in correct position

• CC Duct Channel heater to be fixed at the

  correct position

• All of these

What is the water storage capacity of water dispenser

• 4

  liters

• 2.5

  liters

• 2.8

  liters

• 2

  liters

Which button need to be pressed for FC to RC conversion in 2 door convertible model

• Press and hold FC button for 3 Sec

• Press and hold RC button for 3 Sec

• Press and hold Convert button for 3 Sec

• Press and hold RC & FC for 3 Sec