Knowledge Sharing 6/18

Where should the deflector of an in-rack sprinkler be positioned when close to a horizontal brace [SELECT ALL THAT APPLY]

• Above the horizontal brace

• Level with the bottom of the horizontal brace

• Below the horizontal brace

• Doesn't matter

What is a "Transverse" flue space?

• The space between rows of racks

• The space between pallets and between pallets and uprights

• The space between the top of the load and the racking

• The space between beam levels

What factors determine if you need an in-rack sprinkler system [SELECT ALL THAT APPLY]

• Presence of solid shelves

• Width and location of flue spaces in your racking configuration

• Storage and ceiling height of your warehouse

• Types of commodity classification

During which phase of a Project Life cycle are the ‘’Timelines, resources, and expenditures’’ specified?

• Identification

• Definition

• Execution

• Closure

Is Software Development considered to be a ‘’soft’’ or ‘’hard’’ project?

• soft

• hard

Damotech recommends a down-aisle building clearance equal to _ of the overall racking height

• 5%

• 10%

• 15%

• 2%

OSHA recommends practicing earthquake procedures at least _ time(s) per year

• 1

• 2

• 3

• 4

At Lowe's, how should these deformed baseplate be fixed if the ground is level? [SELECT ALL THAT APPLY]

• Add Shims

• Add an Extra Anchor

• Replace entire upright

• Add a Damoguard

During a Reinspection, you notice a damaged beam that is deformed differently then the Y1 Inspection but on the same location. What do you do?

• Mark as Unchanged

• Mark as Update

• Mark as repaired, and create a new issue

• Delete issue and create a new one

In DES, you must create 2 seperate systems if it can be loaded on both sides and it is not a single deep system.

• True

• False