Latihan Soal MikroTik

A network ready device is directly connected to a MikroTik RouterBOARD with a correct U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.100.50 using a subnet mask of 255.255.255.252. What will be a valid IPv4 address (can be used) for the RouterBOARD for a successful connection to the device?

• 192.168.100.48
• 192.168.100.51
• 192.168.100.49
• 192.168.100.47
• 192.168.100.53

In MikroTik RouterOS, Layer-3 communication between 14 hosts can be achieved by using an address subnet of:

• /25
• /26
• /27
• /28
• /29

The network address is

• The first usable address of the subnet
• The last address of the subnet
• The first address of the subnet

What is term for the hardware coded address found on an interface?

• IP Address
• MAC Address
• FQDN Address
• Interface Address

How many usable IP addresses are there in a 25-bit (255.255.255.128) subnet?

• 254
• 126
• 62
• 30
• 14

Select which of the following are Public IP addresses:

• 192.168.0.1
• 172.168.254.2
• 172.28.73.21
• 10.110.50.37

The basic unit of a physical network (OSI Layer 1) is the:

• Header
• Byte
• Bit
• Frame

Action=masqueradet is applied in

• chain=srcnat
• chain=dstnat
• chain=forward

You have 802.11b/g wireless card. What frequencies are available to you?

• 5800MHz
• 2412MHz
• 5210MHz
• 2422MHz
• 2327MHz

Which is correct masquerade rule for 192.168.0.0/24 network on the router with outgoing interface=ether1?

• /ip firewall nat add action=masquerade chain=srcnat
• /ip firewall nat add action=masquerade chain=srcnat src-address=192.168.0.0/24
• /ip firewall nat add action=masquerade out-interface=ether1 chain=dstnat
• /ip firewall nat add action=masquerade chain=srcnat out-interface=ether1