Auto Collision Repair

What grit of sandpaper is used to first sand cured body filler?

• 40 grit

• 80 grit

• 180 grit

• 220grit

All of the following are vehicle safety systems EXCEPT:

• brakes

• steering

• heating

• restraint

Where can a technician find the right lifting and jacking points on a vehicle?

• jacking label

• lifting label

• body repair manual

• vehicle service manual

On a sheet of metal a straight file is used to:

• flatten metal

• find high and low spots

• prepare the area for filler

• sand the area

Metal surface irregularities can be eliminated by:

• welding

• grinding

• picking and filing

• brazing

Technician A says rough filler takes extra time to sand. Technician B says filler should be applied thick on the 1st coat. Who is correct ?

• Technician A

• Technician B

• Both A and B

• Neither A nor B

The % of hardener added to body filer is about ?

• 20%

• 5%

• 10%

• 15%

How many layers of fiberglass mat are used on the back of a cracked SMC (sheet molded compound)repair ?

• 1 layer

• 2 layer

• 3 layer

• 4 layer

Paint needs removed from a panel Technician A says use a DA.Technician B says a grinder. Who is correct?

• Technician A

• Technician B

• Both A and B

• Neither A nor B

Technician A says to clean all vehicles with wax/grease remover. Technician B says only if road tar is visible. Who is correct ?

• Technician A

• Technician B

• Both A and B

• Neither A nor B