MODULE 6 QUIZ

Forklift cylinders typically hold ______ pounds of propane.

• 20
• 33
• 45
• 100

A _______ functions as the cylinder’s supporting stand or base.

• Handhold
• Foot ring
• Collar
• Neck ring

 The purpose of the O-ring inside the forklift connector is to provide _______ .

• Weather protection
• A gas-tight seal
• Protection from debris
• Refueling safety

Pressure relief valves should be directed upward at a _______ angle on forklift cylinders.

• 30°
• 45°
• 60°
• 90°

Relief valves on forklift cylinders must be replaced within _____ years of the cylinder’s manufacture date and every 10 years thereafter.

• 5
• 7
• 12
• 18

The fixed maximum liquid level gauge is ______ when filling a forklift cylinder by volume.

• Opened
• Closed
• Tightened
• Loosened

For a DOT-4BA240 specification cylinder, the number “240” indicates the cylinder’s _______ .

• Water capacity
• Service pressure
• Tare weight
• Series

 If there is no letter following the date stamped on the cylinder, it indicates requalification is required within ______ years.

• 5
• 7
• 12
• 18

 Leaks, cracks, or bulging are often discovered during a cylinder’s ______ inspection.

• Pre-fill
• Tare weight
• Operational
• Post-fill

When a steady white stream is emitted from the fixed maximum liquid level gauge, the next step is to immediately _______ .

• Shut off the pump
• Close the cylinder service valve
• Check the valve for leaks
• Close the hose end valve