Drill Press Safety Flashcard

Front

Small work should be held on the drill press:

Back

in a vise or firmly clamped.

Front

When operating the drill press you should:

Back

always use eye protection.

Front

When using the drill press remove the chuck key from the chuck to prevent:

Back

the chuck key from being thrown out at a tremendous speed.

Front

If a drill bit catches in your work causing the work to revolve:

Back

stop the machine immediately if possible without endangering yourself. Otherwise, move away from the machine.

Front

Large drill bits should be run at:

Back

Lower speeds.

Front

Router
The workpiece should be moved in a direction:

Back

such that the cut is made against the cutter rotation.

Front

When installing a router bit in the router table:

Back

the collet may be tightened by hand.

Front

When routing small or narrow pieces,

Back

any or all of these, depending on the circumstances.

Front

The router should be unplugged when installing or changing bits.

Back

True

Front

Router
The bit should be bottomed out in the collet.

Back

False