MSSC Quality Review 2A

Front

A part measuring 2.54 inches is out of spec if the specification is __________.

Back

2.00 ± .53

Front

A part measuring 44.85 mm in a process with a tolerance of 45mm ± .28 is considered __________.

Back

In spec, within the tolerance range

Front

If 4 percent of 1200 production pieces are out of spec, how many are out of spec?

Back

48

Front

If a drawing shows a part with a diameter of 1.275 ± .003, what is the minimum and maximum size allowed?

Back

1.272, 1.278

Front

The equipment at a workstation is supposed to produce parts at 2.593, per the part drawing, and has a spec limit of ± 0.004. Is a part that has been produced at 2.590 out of spec?

Back

No, it is within spec

Front

The specifications for the length of produced parts is 5.146 inches with a tolerance of ± 0.005. Is a part that has been produced at 5.140 inches out of spec?

Back

Yes, it is out of spec

Front

Which of the following part lengths is out of spec if the specification calls for a part length of 3.202 (± 0.003)? 3.2, 3.204, 3.201, 3.197

Back

3.197

Front

The maximum material condition for the part shown is __________.

Back

15.75

Front

The least material condition for the part shown is __________.

Back

0.75

Front

Which dimension on a production drawing has the most accuracy? Options: Diameters, The one with the most "tolerance" decimal places, The one with the least "tolerance" decimal places, All dimensions have the same accuracy

Back

The one with the most "tolerance" decimal places