STEERING AND SUSPENSION

Front

When lubricating the front suspension, what should be done?

Back

The grease zerks (fittings) should be wiped clean before greasing.

Front

If a front wheel has radial movement, but the ball joints check good, what would be the most likely cause?

Back

Loose wheel bearings

Front

Camber is the

Back

inward or outward tilt of the wheel in the front

Front

As part of a pre-alignment inspection, the technician should check: tire pressure, riding height, ball joints, all of the above

Back

all of the above

Front

The number 205 in the (P205/75R15) tire information indicates the tire

Back

section width

Front

The modified MacPherson strut rear suspension is very common in

Back

Front-wheel drive cars

Front

Extreme tire wear on the inside edge of the tire tread indicates excessive

Back

negative camber

Front

Excessive positive camber will cause tire wear around

Back

the outer edge

Front

Name this part: Leaf spring, Coil spring, Torsion spring, Twisty spring

Back

Coil spring

Front

Name this part: Sway bar link, Flex coupling, Driveshaft, Rack and Pinion

Back

Rack and Pinion